Owners Manual
Table Of Contents
- Important Safety Information
- Gas and Electrical Safety
- First-Time Operating Instructions
- Introduction
- Parts Identification
- Grill Dimensions
- Island / Cabinet Cutout Dimensions
- Maintaining Adequate Ventilation
- Unpacking the Gas Grill
- Installing the Gas Grill
- Checking for Gas Leaks
- Electrical Requirements
- Included Cooking Components
- Operation
- Cleaning and Maintenance
- Cart Dimensions
- Cart Assembly Instructions
- Specifications
- EdgeStar Limited Warranty
22
1.
2.
3. Align the 3/8” brass coupling nut with the LP tank threads; turn the coupling nut clockwise by
Do
not overtighten the coupling nut connection as it may cause damage or strip the threading.
4. Open the LP tank valve by turning the handle counterclockwise.
5.
“Checking for Gas
Leaks” in this manual for further instructions and details.
6.
burner control valves on the unit to the “HIGH” position for about 20 seconds to allow the air in the
system to purge before attempting to light the burners. Wait 5 minutes after completing this before
lighting the burners.
7. Once the system has purged, you are free to proceed with normal use of the grill. All connection
8. A reminder to always close the LP tank valve [by turning the handle clockwise] when the grill is not
in use.
To Connect the LP Gas Supply:
WARNINGS:
• Always leak-test the connection after relling or exchanging LP cylinders.
• Do not store or use gasoline or other ammable liquids or vapors in the vicinity
of this or any other appliance.
• Turn o LP supply at cylinder when appliance is not in use.
• An LP cylinder not connected for use shall not be stored in the vicinity of this or
any other appliance.
• Do not place more than one (1) LP cylinder in the construction space or cart.
!
X