Owners Manual
Table Of Contents
- Important Safety Information
- Gas and Electrical Safety
- First-Time Operating Instructions
- Introduction
- Parts Identification
- Grill Dimensions
- Island / Cabinet Cutout Dimensions
- Maintaining Adequate Ventilation
- Unpacking the Gas Grill
- Installing the Gas Grill
- Checking for Gas Leaks
- Electrical Requirements
- Included Cooking Components
- Operation
- Cleaning and Maintenance
- Cart Dimensions
- Cart Assembly Instructions
- Specifications
- EdgeStar Limited Warranty
38
Inspecting / Adjusting the Air Shutter
shutter clip. Tighten the screw and reinstall the burner.
Screw
Shutter Clip
Main Burner
NOTE: The ideal ame coming o of the main burner is 1” – 1-1/2” tall. The color
should be blue with yellow peaks. If the air shutter is closed too far, the ames will
be much taller and yellow in color. This is because the gas running to the burners is
not mixing with enough air.
NOTE: Before adjusting the air shutter, ensure that the burner has been cleaned.
Cleaning the Cooking Grates
hood closed and no contents on the cooking grates. Additionally, you will also need to clean
allow the grates to fully cool before handling them.
Cleaning the Ceramic Briquette Flame Tamers
scrub the briquettes with a sponge and wipe with a terry cloth. If necessary, use a wire brush