Owner's Manual

13
Standard Ice Production
• When the ice bucket is full, the ice maker mold will shut o󰀨. However, the refrigeration system will
continue to cool and maintain the ice cube supply.
• Due to fast freezing, ice cubes may appear “cloudy.” This is trapped air in the water and does not
a󰀨ect the taste or quality of the ice.
• “Hollow” ice cubes may result from fast-freezing under certain climatic conditions such as high
humidity. This is not an indication of a problem with the ice maker.
• Ice production can be interrupted by raising the wire shut-o󰀨 arm into an upright and locked
position as shown below. The unit will maintain its temperature for ice storage.
Notes:
• Do not place cans or bottles in the ice compartment because they will freeze.
• If you are not intending to use the ice maker and turn the supply valve o󰀨, it is
imperative to raise the bin arm of the ice maker. Failure to raise the bin arm may
result in damage to the water valve.
• Although the unit has been tested and cleaned at the factory, due to long-term transit
and storage, the rst batch of cubes must be discarded.
• Never turn the water supply tap o󰀨 when the ice maker is running.
• Never touch the ice maker mold when the unit is running!
• Except to take ice from the unit, keep the door closed to reduce melting and ensure
proper ice formation.
!