Owner's Manual

Warning: Before you begin, unplug the Kegerator.

Reversing the Door Swing

1. Open the door and using a Phillips screwdriver, remove the bottom screws from the lower hinge.

2. Carefully slide the bottom of the door forward and down, and place it on a padded surface to

prevent damage.

Installing the Casters

This unit comes with four (4) casters. These are an optional accessary to assemble if you would like

to make the unit more mobile. To install the casters:

1. Remove the four leveling legs from the bottom of the unit.

2. Separate the front casters and back casters. The front casters have a lever for a brake lock.

3. Place the top plate of the caster over the area of the removed leveling leg and align the opening

to the screw hole openings.

4. Insert the screws to attach the caster to the cabinet.

5. Make sure the screws are tight so the caster is installed rmly.