Owner's Manual
9
Countertop Opening for Dispense Kit
Notes:
• Choose a location that has ambient temperatures above 50° F and below 95° F. Operation
outside these temperatures may result in lowered eciency or cause other adverse eects.
• This unit MUST be installed in an area protected from the elements, e.g. wind, rain, water
spray or drips.
• The kegerator should not be located next to ovens, grills, or other heat sources.
• Do not kink or pinch the power supply cord between the kegerator and the wall or cabinet.
Once the location of the kegerator installation is determined the rst step is to create an opening in the
counter for the dispense kit lines to pass through.
1. Mark o a spot on the countertop where the opening will be created.
2. Align that spot so it will be directly above the opening of the kegerator that will be placed under the
counter.
3. Drill or cut (depending on the material of your countertop) an opening into your counter the same
size as the opening of the top of the kegerator.
4. Conrm that the opening is not larger than the size of the dispense tower for optimal performance.