EDIFIER Extreme Connect MP260 Portable Multimedia Speaker User manual | Manuel d’utilisateur | Manual de usuario | Bedienungsanleitung| Manuale dell’utente
Page1 Unpack the box Extreme Connect - MP260 Box contents Carrying bag User Manual USB-Micro USB cable 3.
Page 3 Important safety instructions WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 1. Keep these instructions. 2. Follow all instructions. 3. Do not use this apparatus under water. 4. Clean only with dry cloth. 5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Only use attachments/accessories specified by the manufacturer. 7.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
Page 6 Illustrations 1. Power On/Off switch 2. Micro USB connector port 3. Micro SD card slot (Micro SD card not included) 4. AUX input port 5. Charging indicator 6. Power/Input LED indicator 7. Audio input selector 8. Bluetooth phone key (see page 7 for detail) 9. Previous track/folder 10. Next track/folder 11. Play/Pause 12. Volume up/down Side view Note: / input mode.
Answer incoming phone call---- Press once Hang up (end) the phone call ----Press once Decline (reject) the incoming phone call ----Press & hold Switch conversation to your mobile phone from the “EDIFIER Extreme Connect” ----Press & hold ************************************************************************************************************************************* Note: 1. Incoming and outgoing calls will interrupt audio playback. 2.
Page 9 Operational guide USB audio input red Ú Press until the power/input indicator is red. Ú Connect the EDIFIER Extreme Connect to the PC or laptop using the included USB connecting cable, open audio medium and play. Adjust the volume to a desired level. Note: You may need to access your system settings on your computer to choose the “EDIFIER Extreme Connect” as your sound output device. USB audio Instruction for Mac Users Step 1: Connect the EDIFIER Extreme to your Mac using the USB cable.
USB audio Instruction for PC Users (Windows XP) Connect the EDIFIER Extreme to your PC with the USB cable. Step 1: Click “Start” Ú “Setting” Ú“Control Panel” Step 2: Step 3: Click “Sounds, Speech, and Audio Devices” Ú “Sounds, and Audio Devices” Step 4: Set the Hardware: “EDIFIER Extreme Connect”, then click “OK”. Step 5: Open audio medium and play. Adjust the volume to a desired level. Page 10 Operational guide 3.5mm Stereo line-in green Ú Press until the top indicator is green. Ú Connect the 3.
Folder depth: File format: Bluetooth Specification: Version: Supposed profiles: Max transmit range: Speaker Specification: Active drivers: Passive driver: Product Dimension: Net Weight: Gross Weight: 7 classes MP3/WMA V2.1+ EDR A2DP, AVRCP 10M or 30FT 2 × 1¾ inch (48mm), magnetically shielded, 4ohm 50mm × 90mm 159.4(W) × 61(H) × 42(D) mm Approx. 0.42kg Approx. 0.56kg Page 12 Troubleshooting ● Ensure the EDIFIER Extreme Connect is fully charged.
