SDS

ADD: 深圳市光明区公明镇楼村振兴路
8
号后海旭发科技园 5 栋 WEB: www.lideabattery.com
TEL: [phone] FAX: [phone] E-MAIL: [e-mail]
6
TABLE Ⅲ:
No ITEM TEST METHODS STANDARED
1 Dimensions
Using vernier caliper (accuracy≥0.02) while
avoiding short-circuit
Diameter 20.0 (-0.1) mm
Height 3.2 (-0.2) mm
2
Off-load
voltage
Using multimeter (accuracy≥0.25%) internal
resistance≥1MΩ
≥3.2 v
3
Instantaneous
short-circuit
current
Time of short-circuit should be less than 0.5
second and avoid repeated test within half an
hour
≥250 mA
4 Appearance Eyeballing
Bright, clean, no rust, no
leakage, And no flaw
5 Capacity
Continuously discharge for 8 hours with load
15kΩ, temperature at 20~25℃, humidity at
65±20% till 2.0v end-voltage (for fresh
battery only: within 3 months )
≥1200 h
6 Vibration test
Put battery on the platform of the vibrations
machine, start the machine and adjust the
frequency form 10 times per minute to 15
times per minute. keep it running for an hour
Characteristics keep stability
7
Leakage at
high
temperature
test
Stored under temperature (60℃) for 7 days No leakage allowed
8
Over
discharge
Test
After 2.0v end-voltage, continuously
discharged for 5 hours
No leakage allowed
5. 【 CUTAWAY DIAGRAM OF 3.0V LITHIUM MANGANESE DIOXIDE BUT TON CELL 】