Declaration of Conformity

ManualsBrandsEDIFIER ManualsAudio EquipmentWireless Noise Cancellation Over-Ear Headphones

Table Of Contents

底面

IB-200-WH950N-00 说明书/WH950NB出口25国语言/V1.0

尺寸：55X70mm

材质：65克哑光铜版纸，对折打钉

工艺：单黑印刷文字印85%灰

封面

For more information, please visit our website:

www.edifier.com

@Edifier_Global @Edifier_Global@Edifierglobal

Model: EDF200102

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

www.edifier.com

Printed in China

NOTICE:

For the need of technical improvement and system upgrade,

information contained herein may be subject to change from time to

time without prior notice.

Products of EDIFIER will be customized for different applications.

Pictures and illustrations shown on this manual may be slightly

different from actual product.

If any difference is found, the actual product prevails.

IB-200-WH950N-00 V1.0

Wireless Noise Cancellation Over-Ear Headphones

WH950NB

Manual

配對

1. 關機狀態下，長按電源鍵6秒後進入藍牙

配對模式，耳機狀態燈將快閃藍色LED。

2. 設備搜索“EDIFIER WH950NB”選擇連接。

首次配對:

1. 耳機開機後直接進入藍牙配對模式, 耳

機狀態燈將快閃藍色LED。

2. 設備搜索“EDIFIER WH950NB”選擇連接。

快速配對(適用於Android 6.0以上版本)：

耳機開機後進入藍牙配對模式,並靠近安卓

手機，即可點擊彈跳視窗輕鬆完成配對。

註：

1. 已有配對記錄後，每次耳機開機後將自動回連最近連接過的設備。

2. 雙設備連接:已連接一台設備後，重新開機進入藍牙配對模式連接

第二台新設備。再從原設備中手動重連耳機，即可完成雙設備連接。

重置

狀態燈

控制

77 78 79

1. 耳機開機並斷開所有設備。

2. 同時長按“ ”及“ ”6秒，耳機狀態燈

將快閃白色LED直到完成重置。

3. 完成重置後，直接進入藍牙配對模式。

指示燈

註：

1. 降噪設置在“深度降噪”及“環境聲”及“降噪關”間切換。

2. 場景模式在“音樂模式”及“遊戲模式”及“劇院模式”間切換。

3. 可通過Ediﬁer Connect App進行個性化操控設置.

>2s

>6s

x1 x1>2s

x2 >2s

開關機

藍LED快閃

藍LED長亮3秒後熄滅

藍LED將每5秒閃2下

電量狀態

藍牙狀態

熄滅

Scan and download

Edifier Connect App

Edifier Connect

GET IT ON

82 83

Note:

Images are for illustrative purposes only and may differ from the actual product.

产品中有害物质的名称及含量

設備名稱 Equipment name：覆耳式降噪頭戴耳機

型號 (型式) Type designation (Type)：EDF200102

限用物質及其化學符號

Restricted substances and its chemical symbols

單元

Unit

鉛

Lead

金屬零件

超出

0.1 wt %

塑膠零件

○

電纜

電路板元件

○

六價鉻

Hexavalent

chromium

(Cr )

○

備註1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。

Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds

the reference percentage value of presence condition.

備

註

2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。

Note 2：“ ○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence

備

註

3.〝－〞係指該項限用物質為排除項目。

Note 3：The “−” indicates that the restricted substance corresponds to the exemption

汞

Mercury

(Hg)

○

鎘

Cadmium

(Cd)

○

多溴聯苯

Polybrominated

biphenyls

(PBB)

○

多溴二苯醚

Polybrominated

diphenyl ethers

(PBDE)

○

NCC聲明：

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得

擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之

使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停

用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規

定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫

療用電波輻射性電機設備之干擾。

App Store

Download on the

Input: 5V 1A

FCC statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause

undesired operation.

IC statement:CAN ICES-003(B) / NMB-003(B).

Specific Absorption Rate (SAR) information:

This (Edifier International Limited) meets the government's requirements for

exposure to radio waves. The guidelines are based on standards that were

developed by independent scientific organizations through periodic and

thorough evaluation of scientific studies.

The standards include a substantial safety margin designed to assure the

safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.

Device types: (EDF200102) (FCC ID: Z9G-EDF193) has also been tested

against this SAR limit. The highest SAR value reported under this standard

during product certification when properly worn on the body is 0.032W/kg.

This device was tested for typical body-worn operations with the back of the

handset kept 0mm from the body. To maintain compliance with FCC RF

exposure requirements, use accessories that maintain a 0mm separation

distance between the user's body and the back of the handset. The use of

belt clips, holsters and similar accessories should not contain metallic

components in its assembly. The use of accessories that do not satisfy these

requirements may not comply with FCC RF exposure requirements, and

should be avoided.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF

exposure requirements, a minimum separation distance of 0mm must be

maintained between the user’s body and the handset, including the antenna.

Third-party belt-clips, holsters, and similar accessories used by this device

should not contain any metallic components. Bodyworn accessories that do

not meet these requirements may not comply with RF exposure requirements

and should be avoided. Use only the supplied or an approved antenna.

Hereby, Edifier International Limited declares that the radio equipment type

EDF200102 is in compliance with Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following internet address:

https://www.edifier.com/int/eu-doc.html

Declaration for EU

Frequency Band: 2400Mhz-2483.5Mhz

RF Power Output: ≤12dBm (EIRP)

There is no restriction of use.

長按電源鍵2秒。

指示燈

Pairing

1. When they’re power off, press and hold the

power button for 6s. The status light blinks blue.

2. Select "EDIFIER WH950NB" in your device

setting to connect.

1st Pairing

1. Once the headphones are power on, they will

enter Bluetooth pairing automatically. The status

light blinks blue.

2. Select "EDIFIER WH950NB" in your device

setting to connect.

Fast Pair (Phone with Android 6.0+)

Power on and enter Bluetooth pairing with Android*

device close by. Then tap the pop-up window to connect

effortlessly.*

Note:

1. For subsequent use, the headphones will auto-connect to device used last

time.

2. Dual-Device Connection:After connected to a device, restart and enter

Bluetooth pairing to connect the second device. Then manually re-pair the

headphones again from the first device to complete Dual-Device connection.

Reset

Status Light

1 2 3

1. The headphones are power on and disconnected

from all devices.

2. Press and hold the " " and " " at the

same time for 6s.

3. The status light blinks white until reset is

completed.

4. Once the headphones are reset, they enter

pairing mode automatically.

Indicator

Note:

1. ANC Setting switch between "High Noise Cancellation" & "Ambient Sound" &

"Noise Cancellation Off".

2. Sound Mode switch between "Music Mode" & "Game Mode" & "Theatre Mode".

3. Customized controls via Edifier Connect App.

Power ON/OFF

Blue LED blinks

Blue LED on for 3s

Blue LED blinks twice every 5s

Red LED blinks twice every 5mins

Red LED on

LED off

Battery Status

Bluetooth Status

Press and hold the power button for 2s.

Indicator

Controls

>2s

>6s

x1 x1

>2s

x2 >2s

FCC ID: Z9G-EDF193

IC: 10004A-EDF193

210-196511

Summary of content (2 pages)

PAGE 1
IB-200-WH950N-00 说明书/WH950NB出口25国语言/V1.0 尺寸：55X70mm 材质：65克哑光铜版纸，对折打钉工艺：单黑印刷文字印85%灰底面封面 For more information, please visit our website: www.edifier.com @Edifierglobal @Edifier_Global @Edifier_Global Model: EDF200102 Edifier International Limited P.O. Box 6264 General Post Office Hong Kong www.edifier.com 2022 Edifier International Limited. All rights reserved.
PAGE 2
FCC Regulatory Compliance Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.