R1580MB Multimedia Speaker User manual Page 1: What’s in the Box Box Contents: Passive speaker Remote control Active speaker RCA to RCA audio cable (1.7M/5.5ft) 3.5mm to RCA audio cable (1.7M/5.5ft) Speaker connecting cable (5M/16.
Page2 Speaker control PC/AUX input MIC1 port MIC2 port Bass volume knob Power switch Power cable Connect to passive speaker Connect to active speaker Microphone volume adjustment PC/AUX/Bluetooth volume adjustment Master volume knob Press: audio source mode selection Press and hold: disconnect Bluetooth under Bluetooth mode; enter standby under other modes 12. Power indicator Green: AUX/PC mode Blue: Bluetooth mode 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Page 3 Remote control ON/standby Volume increase Volume decrease Press: Bluetooth Press and hold: Disconnect Bluetooth PC/AUX input Previous track (for Bluetooth mode) Next track (for Bluetooth mode) Play/pause (for Bluetooth mode) Mute/de-mute Battery loading: Please refer to the illustration to open the battery compartment, insert the CR 2025 battery and close the compartment. Note: 1. Do not place the remote control in places that are hot and humid. 2. Do not charge the batteries. 3.
Page 4 Connection 1. Connect the speakers with the speaker connecting cable. 2. Connect audio source (mobile phone, tablet etc.) to PC IN/AUX IN input on the active speaker rear panel using the included audio cable, LED indicator will turn green. 3. Connect to power source and turn on the speaker, power indicator is lit. 4. Play music and adjust volume to a comfortable level. 5. R1580MB can be connected to microphone.
Page 5 Bluetooth operation Specifications Power output: R/L: 21W + 21W Noise level: ≤25dB(A) Frequency response: 55Hz~20KHz Microphone dynamic range: -50~30dBV Input sensitivity: PC: 700±50mV AUX: 550±50mV Bluetooth: 550±50mFFs Treble unit: ½ inch (13mm) Mid-range and bass unit: 4 inch (116mm) Bluetooth version: V4.
