Manual Edition 1.0, Nov. 2016 |B-200-50350D-00 Suit 2207, 22nd floor, Tower Philippe center, 89 Queen sway Hong Kong Tel: +852 2522 6989 Fax: +852 2522 1989 www.edifier.com © 2016 Edifier International Limited. All rights reserved. Printed in China NOTICE: For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications.
English WARNING: To reduce risk of fire or electric shock, do not expose this apparatus to rain or moisture. Thank you for purchasing Edifier 5350DB active speakers. Please read this manual carefully before operating this system. CAUTION Ee Ele ate ole ee The lightning flash with arrowhead inside 1o prevent the risk of electric shock, do not The exclamation point inside the triangle the triangle, is intended to alert the user remove cover {or back).
English 1. Power switch 2. Power cable connector 3. PC input 4. AUX input 5. Optical input 6. Coaxial input 7. Connect to satellite speaker(R) 8. Connect to satellite speaker(L) 9. Connect to sub woofer ci i 10. Display screen 11. Treble volume dial 12. Bass volume dial 13. Master volume dial/input selection Press it to navigate between audio inputs: Cypress and hold to enable and disable the standby function 14, Power indicator Remote control EDIFIER 1. ON/OFF " ; 2. Optical input G ’ 3.
1. Press the master volume control on the active satellite speaker or press the "OPT/COX” button on the remote control to select optical/coaxial input. 2. Using optical or coaxial cable (optical cable included) to connect audio sources to your speaker. 3. Play from your devices and adjust the volume accordingly. Note: In optical and coaxial modes, only PCM signal with can be decoded.
English 1. Press the master volume control on the active satellite speaker or press the “PC/AUX” button on the remote control to select PC/AUX input. 2. Use the audio cable to connect audio sources {mobile phones, tablets etc) to your speaker. 3. Play from your device and adjust the volume accordingly. Pairing 1.
English Power output: Noise level: Frequency response range: Audio inputs: RIL (treble): 15W+15W R/L (mid-range and bass): 25W + 25W SW: 70W = 25dB(A) SW: 40Hz~160Hz R/L: 160Hz~20KHz PC/Auxiliary/Optical/Coaxial/Bluetooth Note: the rated test frequency is as follows: the treble test is kHz, mid-range and bass test is 500Hz, the bass test is 80Hz. ® ® 6 Bluetooth 6) Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license.
