Quick Start Guide

Japan Ergonomics Inc. EDIKUN Foot Switch FS2 Series Quick Start Guide for Windows

models FS2P2 to FS2P5 with multiple pedals, the message also indicates which pedal is being

set.

After reviewing the message, click the "OK" button. You will be returned to the main window.

If you do not need to set any other pedals, close the main window and exit this application.

(3) Clicking the "Cancel" button in the standard settings window closes the standard

settings window and returns to the main window. In this case, no settings are made to the foot

switch and the contents of the foot switch memory remain unchanged. If the close button ([X]

button) in the upper right corner of the standard setting window is clicked, it is the same as

the [Cancel] button.

(4) In the standard settings, you can configure the keys on the keyboard and the mouse

clicks. These can be selected by clicking on the "Keyboard" and "Mouse" tabs.

On the keyboard, you can set the standard keys used in Japanese Windows. Modifiers (Ctrl,

Shift, Alt, and Windows keys) can also be added.

The mouse can be set to click the left, right, and middle buttons (middle button), as well as

double-click the left button.

(5) Note that if you click the Standard

Setting button when the corresponding pedal is

set to a value that can only be set in the

Advanced Setting (refer to the instruction

manual), the message shown on the right will

appear. To rewrite the memory of the corresponding pedal to that of the standard range, click

the [OK] button. To return to the main window without doing anything, click the [Cancel]

button. Even if you click the "OK" button here, the memory in the foot switch will not be

changed until you click the "Write to Foot Switch" button.

D-1. Keyboard Key Settings

(1) [After clicking on the "Keyboard" tab, the Standard

Settings window will look like the one shown to the right, for

example. When you select a key in the list box at the top of the

window, its description will appear in the "Description"

column. Some keys do not display a description.

The "Keyboard" key settings in the standard settings probably

cover most of the keys normally used in Japanese Windows,

but if you want to use other keys, please set the "Key Output

Settings" in the advanced settings (see "E-1 Key Output

Settings" in the User's Manual).