Operating Instructions and Installation Instructions

ENGLISH

COVERING INSTALLATION VINTAGE

Phase E

Installation of the ceramic intermediate side compo-

nents

Place the ceramic component parallely along the side,

fitting the housings 8 (at the ends of the front edge) into

the fastening brackets (6).

Slide the ceramic component towards the rear of the

stove until it fits completely on the brackets.

Reassemble the rear intermediate sheet metal profiles

(4).

Adjust the position of the ceramic element using

the adjustment grub screws (V); the three adjustment

grub screws must be tightened on each individual lower

fixing bracket (7).

Note: The grub screw must be inserted into the lower

fixing bracket with the hollow part facing down.

Phase F

Assembly of lower and upper ceramic side compo-

nents

Place the ceramic component parallely along the side,

fitting the housings 8 (at the ends of the front edge) into

the fastening brackets (6).

Slide the ceramic components towards the rear of the

stove until they fit completely on the brackets.

Reassemble the front sheet metal profiles (3-5).

Adjust the couplings and alignments of the upper cera-

mic element using the adjustment grub screws (V); the

three adjustment grub screws must be must be tightened

on each individual upper fixing bracket (7).

Note: The grub screw must be inserted into the upper

fixing bracket with the hollow part facing up.

Phase G

ceramic top assembly:

Place the ceramic top (10) over the cast iron stove top

Phase F/G

Phase E