Specifications

CHECK LIST
Read the entire specifications before using this list
Installation and setup
• Installation carried out by an authorized TAC which has issued the guarantee and maintenance booklet;
o Room ventilation;
o The smoke duct/flue only receives smoke from the stove;
o The smoke duct has:
 no more than 3 bends;
 a horizontal section of no more than 2 metres;
 a vertical section of at least 1.5 metres;
o The outlet pipes are made of a suitable material (stainless steel is recommended);
o Where pipes cross any flammable materials (e.g. wood) all precautions have been taken to avoid
fire;
• The plumbing has been declared as compliant with Italian law No. 46/90 by an authorized technician;
• The heatable room dimensions have been suitably calculated considering the heating efficiency of the
heat emitting units (radiators).
Use
• The pellets used are good quality and not damp;
• The combustion chamber and ash pan are clean and have been placed correctly;
• The cleaning rods are operated every day;
• The heat exchange pipes are clean (use pipe cleaner);
• The pressure (read on the gauge) is about 1 bar.
REMEMBER TO VACUUM CLEAN THE COMBUSTION CHAMBER BEFORE EACH IGNITION
If ignition fails, do NOT repeat ignition before emptying the combustion chamber
Via Mascagni, 7 - 20020 LAINATE (MI) - Italy
Tel. [phone] – Fax [phone]
www.edilkamin.com - [e-mail]
EdilKamin S.p.A. reserves the right to modify parts of the following manual without prior notice:
cod. 272340 …-05.06/A
20