Specifications

13
Automatic operation using the remote control
Press the Menu key to switch to automatic operation and set the temperature required in the room (to adjust the
temperature from 5°C to 35°C use the + and -). The insert adjusts its working power to reach the temperature set
(POWER 3 or maintain POWER 1).
If the temperature set is lower than in the room, the insert runs at P1.
Ventilation adjustment using remote control
With the insert operating, press the menu key again. The ventilation may now be adjusted (9 levels associated three by
three to the power levels) using the + and - keys.
Ventilation adjustment is only possible using the remote control during manual operation.
Switching off
Hold the 0/1 key down on the display-control panel or remote control for two seconds while the insert is operating. The
shutdown procedure starts and a countdown from 600 to 0 appears on the display (for a total of 600 seconds).
During shutdown:
• Pellet loading ceases.
• Ventilation turns up to maximum
• The smoke expulsion motor turns up to maximum.
Never unplug the insert while it is shutting down.