Technical data

38
ENGLISH
INSTALLATION
KIT 8 (code 297360)
Note: THE FIRST PART OF THE FLEXIBLE PIPE MUST BE COMPLETELY "RELAXED" IN SUCH A
WAY TO ELIMINATE CORRUGATION. IN THIS WAY, THE INTERNAL DIAMETER WILL BE SLI-
GHTLY ENLARGED TO FAVOUR ENTRANCE.
- Define the position of the stove with respect to the walling (fig. a).
- Enable the hot air channelling control lever (see page 10).
- Place the stove in its final position and fasten it to the wall using the supplied brackets (A and B) or, if necessary, an
alternative system that will ensure the stove's stability (see page 36).
- Extend the aluminium pipe (2) for hot air channelling, without connecting the stove outlet.
- Fit the aluminium pipe to the hot air outlet (A).
- Install the terminal outlet (3) and its aluminium pipe (2).
It is essential to remember the importance of proper insulation on the pipe where the hot air passes to avoid
dispersion. Avoid curves in the pipe as much as possible.
KIT 8
n° code
-
Pipe blocking clamp 2 46160
1
Ø 10 pipe 1 162520
2
Smoke outle
tend-piece
1 293430
1
2
A
fig. a
EXAMPLES OF WARM AIR CHANNELLING AND SMOKE EXHAUSTS
from the side
from the back
from the top
sk tecnica Multilingua TINY_KELLY cod 665980 _definitiva x stampa.qxp 24/06/2011 9.56 Pagina 39