Technical data

ENGLISH

CLADDING ASSEMBLY

TINY (the KELLY model comes pre-assembled)

Smallware included:

nr. 4 Threaded rods M8x45

nr. 4 Ceramic cap fixing studs

nr. 2 M6 x 12 screws with nuts

nr. 30 Self-tapping screws 4.2 x 9.5

nr. 16 Screws 4.2 x 12

Fig. 1

In this phase the stove has just been unpacked and placed

in the room

Fig. 2 / 3 - Mounting the side cladding

Mount the two central sheet metal panels (A) and the

perforated ceramic tiles (C) onto the sheet metal sides

(B) using the screws provided (M6x12).

Attach the sheet metal sides (B), complete with their

cladding (A and C) to the stove using the self-tapping

screws provided (4,2x9, 5) ; the holes to attach them are

accessible from inside the hole on the ceramic tiles.

Screw the threaded rods (D) into the studs, place the

ceramic lids (E) in the holes on the sides and secure

them with the studs (F).

Fig. 2/3 - Mounting the lower inserts

Fasten the two ceramic inserts (G) to the support plate (H)

using the supplied M6x12 screws and spacers (N).

Attach the sheet metal support complete with ceramic

inserts on the base of the stove using the self-tapping

screws (4,2x9,5) provided, the holes are accessible by

opening the two glass doors.

Fig. 1

Fig. 3

Fig. 2

sk tecnica Multilingua TINY_KELLY cod 665980 _definitiva x stampa.qxp 24/06/2011 9.56 Pagina 34