Technical data

34
ENGLISH
CLADDING ASSEMBLY
TINY
Fig. 3 - Mounting the top right ceramic piece
Attach the sheet metal cover (I) to the ceramic support
plate (L) using the self-tapping screws provided (4,2x9,5).
Attach the ceramic top (M) to the sheet metal plate using
the M6x12 screws provided.
Thus assembled, put the plate in place by inserting one
end under the ceramic on the right side and attach it using
the self-tapping screws provided (see detail X).
Fig. 3 - Mounting the top left ceramic piece
Hinge the pre-assembled plate (P) onto the bracket (S)
located on the top, using the two M5 screws and the two
nuts provided.
Caution: make sure the ceramic support plate (P) thus
mounted is free to rotate to allow access to the pellets lid.
By holding the plate up vertically, attach the ceramic top
(M) using the M6x12 screws included.
Fig. 4
The stove is now ready for use.
POSITIONING
Fasten the stove to the wall using the supplied brackets (A
and B) or, if necessary, an alternative system that will
ensure the stove's stability.
The stove must be level for it to function correctly.
Verify the bearing capacity of the floor.
Fig. 4
Detail X
Finished detail top ceramic plates
L
I
M
P
M
Fig. 3
D
E
F
S
A
B
sk tecnica Multilingua TINY_KELLY cod 665980 _definitiva x stampa.qxp 24/06/2011 9.56 Pagina 35