Instructions

17
5-2 Management
Use this page to reset the switch to original factory default settings, reboot the switch, backup
and restore switch settings, and upgrade firmware.
To view the Management menu, navigate to Management.
Figure 11 Management
Item
Description
DHCP
Enable
Obtain an IP address automatically.
Disable
Use a static IP address
Management
Reset
Restore switch to original factory default settings.
Reboot
Reboot switch.
Configuration Restore/Backup
Browse
Click to browse a remote TFTP server or on local storage, to locate a file with a previously
saved switch setting configuration.
Restore
Install selected switch setting configuration file.
Backup
Save current switch setting configuration as a backup file.
Firmware Upgrade
Upgrade
Install selected firmware file.