Instructions

9
Chapter 3 Installation
This chapter describes how to install and connect your Edimax Switch. Read the following
topics and perform the procedures in the correct order. Incorrect installation may cause
damage to the product.
3-1 Placement Tips
 Ambient Temperature – To prevent the switch from overheating, do not operate it in an
area that exceeds an ambient temperature of 122°F (50°C).
 Air Flow – Be sure that there is adequate air flow around the switch.
 Mechanical Loading – Be sure that the switch is level and stable to avoid any hazardous
conditions.
 Circuit Overloading – Adding the switch to the power outlet must not overload that
circuit.
Follow these guidelines to install the switch securely.
1. Put the switch in a stable place such as a desktop, to avoid it falling.
2. Ensure the switch works in the proper AC input range and matches the labeled voltage.
3. Ensure there is proper heat dissipation and adequate ventilation around the switch.
4. Ensure the switch’s location can support the weight of the switch and its accessories.
3-2 Desktop Installation
To place the switch on a desktop:
1. Install the four rubber feet (included) on the bottom of the switch.
2. Place the switch on a flat surface.
Figure 4 Desktop Installation