User's Manual

Wireless LAN Wireless Converter Configuration
11
want to bridge more than two wired Ethernet networks together, you have to use
enough Access Points with “AP Bridge-Point to Multi-Point mode”. An Access Point
with “AP Bridge-Point to Point mode” or “AP Bridge-Point to Multi-Point mode”
can only be used to bridge wired Ethernet networks together. It can’t accept
connection from other wireless station at the same time. If you want an Access Point
to bridge wired Ethernet network and provide connection service for other wireless
station at the same time, you have to set the Access Point to “AP Bridge-WDS mode”.
Simply speaking, “AP Bridge-WDS mode” function is the combination of “AP
mode” and “AP Bridge-Point to Multi-Point mode”.
3.2.2.1 AP, Bridge and WDS Mode
AP Mode Setting Page:
AP Bridge-Point to Point Mode Setting Page: