User's Manual

Wireless LAN Wireless Converter Configuration
15
connecting to the Wireless Converter.
MAC Address
If you want to bridge more than one wired Ethernet network together with
wireless LAN, you have to set this Wireless Converter to “AP Bridge-
Point to Point mode”, “AP Bridge-Point to Multi-Point mode” or “AP
Bridge-WDS mode”. You have to enter the MAC addresses of other
Wireless Converters that join the bridging network.
Set Security
Click “Set Security” to set up security. From here, you can only enable
WEP setting, for more setting, please enter into “Security” option in the
left side of the screen.
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Wireless Converter.
Active Wireless Client Table
“Active Wireless Client Table” records the status of all active wireless stations that
are connecting to the Wireless Converter in “AP mode”, “AP Bridge-Point to Point
mode”, “AP Bridge-Point to Multi-Point mode” and “AP Bridge-WDS mode”. You
can lookup the MAC Address and Power Saving Status of each active wireless client
in this table.