User's Manual

Wireless LAN Wireless Converter Configuration
24
Transmit Burst Mode
Transmit Burst enables the AP to deliver the better throughput in the
same period and environment.
IAPP
If you enable “IAPP”, the wireless converter will automatically broadcast
information of associated wireless stations to its neighbors. This will help
wireless station roaming smoothly between access points. If you have
more than one wireless converters in your wireless LAN and wireless
stations have roaming requirements, enabling this feature is
recommended. Disabling “IAPP” can provide better security.
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Wireless Converter.
3.2.4 Security
This Wireless Converter provides complete wireless LAN security functions, the
authentication methods including Open System, Shared Key, WPA-PSK, WPA-
RADIUS and full function of IEEE 802.1x; the encryption functions including WEP,
TKIP and AES. With these security functions, you can prevent your wireless LAN
from illegal access. Please make sure your wireless stations use the same security
function.
The security setting for Station Mode and AP mode are different. For the security
setting in Station Mode including “Station-Ad Hoc Mode” and “Station-Infrastructure
Mode”, please refer to section 3.2.4.1. For the security setting in AP mode including
“AP Mode”, “AP Bridge-Point to Point Mode”, “AP Bridge-Point to Multi-Point
Mode” and “AP Bridge-WDS Mode, please refer to section 3.2.4.2.
3.2.4.1 Security Setting in Station Mode
Authentication Type