User's Manual

2.6.6 Static Routing

This router provides Static Routing function when NAT is disabled. With Static Routing,

the router can forward packets according to your routing rules. The IP sharing function

will not work any more in Static Routing mode.

Note: The DMZ function of firewall will not work if static routing is enabled.

Parameter Description

Enable Static Routing Static Routing function is default disabled. You

have to enable the Static Routing function before

your routing rules take effect.

Destination LAN IP The network address of destination LAN.

Subnet Mask The subnet mask of destination LAN.

Default Gateway The next stop gateway of the path toward the

destination LAN. This is the IP of the neighbor