User's Manual

displayed here. If you don‟t enable security function

of the wireless router before WPS is activated, the

router will auto set the security to WPA (AES) and

generate a set of passphrase key for WPS

connection.

Passphrase Key: The wireless security key of the

router will be displayed here.

Config Mode (3): There are „Registrar‟ and „Enrollee‟ modes for the

WPS connection. When „Registrar‟ is enabled, the

wireless clients will follow the router‟s wireless

settings for WPS connection. When „Enrolle‟ mode

is enabled, the router will follow the wireless

settings of wireless client for WPS connection.

Configure Click „Start PBC‟ to start Push-Button style WPS

by Push Button (4): setup procedure. This wireless router will wait for

WPS requests from wireless clients for 2 minutes.

The „WLAN‟ LED on the wireless router will be

steady on for 2 minutes when this wireless router is

waiting for incoming WPS request.

Configure Please input the PIN code of the wireless client you

by Client wish to connect, and click „Start PIN‟ button.

PinCode (5): The „WLAN‟ LED on the wireless router will be

steady on when this wireless router is waiting for

incoming WPS request.

2-8-6 Security Tips for Wireless Network

Here are some quick tips to help you improve the security level of your

wireless network:

1. Never use simple words (like school, apple and computer) as WEP

encryption or WPA passphrase.