User's Manual

802.11g and 802.11n connection automatically.

SSID (3): This is the name of wireless router. You can type any

alphanumerical characters here, maximum 32

characters. SSID is used to identify your own

wireless router from others when there are other

wireless routers in the same area. Default SSID is

„default‟, it‟s recommended to change default SSID

name to the one which is meaningful to you, like my

home, office_room1, etc.

Channel Number (4): Please select a channel from the dropdown list of

„Channel Number‟, available channel numbers are

1 to 13 for European countries, 1 to 11 for USA. You

can choose any channel number you want to use,

and almost all wireless clients can locate the

channel you‟re using automatically without any

problem. However, it‟s still useful to remember the

channel number you use, some wireless client

supports manual channel number select, and this

would help in certain scenario when there is some

radio communication problem.

Associated Clients (5): Click „Show Active Clients‟ button, then an

“Active Wireless Client Table” will pop up. You can

see the status of all active wireless stations that are

connecting to the access point.

After you finish with all settings, please click „Next‟ (6) button; if you

want to go back to previous menu, click „Back‟.