User's Manual

people those who know the ESSID of your wireless

router can get connected.

CTS Protect (10): Enabling this setting will reduce the chance of radio

signal collisions between 802.11b and 802.11g/n

wireless access points. It‟s recommended to set this

option to „Auto‟ or „Always‟. However, if you set to

„None‟, your wireless router should be able to work

fine, too.

Tx Power (11): You can set the output power of wireless radio.

Unless you‟re using this wireless router in a really

big space, you may not have to set output power to

100%. This will enhance security (malicious /

unknown users in distance will not be able to

reach your wireless router).

WMM (12): The short of Wi-Fi MultiMedia, it will enhance the

data transfer performance of multimedia contents

when they‟re being transferred over wireless

network. If you don’t know what it is / not sure if

you need it, it’s safe to set this option to ‘Enable’,

however, default value is ‘Disable’.

After you finish these wireless settings, please click „Apply‟ (13)button,

and the following message will be displayed on your web browser:

Please click „Continue‟ to back to previous setup menu; to continue on

router setup, or click „Apply‟ to reboot the router so the settings will take

effect (Please wait for about 30 seconds while router is rebooting).