User's Manual

c. AP Bridge-Point to Point: Connect this router with another wireless

router, to expand the scope of network.

d. AP Bridge-Point to Multi-Point: Connect this router with up to four

other wireless routers, to expand the scope of network.

e. AP Bridge-WDS: Connect this router with up to four WDS-capable

wireless routers, to expand the scope of network.

f. Universal Repeater: The router can act as Station and AP at the same

time. It can use Station function to connect to a Root AP and use AP

function to service all wireless stations within its coverage.

Please select a proper operation mode you want to use from ‘Mode’

dropdown menu (1), and continue on other operation mode specific

settings:

AP - Please go to section 2-7-1-1

Station-Infrastructure - Please go to section 2-7-1-2

AP Bridge-Point to Point - Please go to section 2-7-1-3

AP Bridge-Point to Multi-Point - Please go to section 2-7-1-4

AP Bridge-WDS - Please go to section 2-7-1-5

Universal Repeater - Please go to section 2-7-1-6

2-7-1-1 Setup procedure for ‘Access Point’:

Please select the radio band you want to use from ‘Band’ dropdown menu

(2), and the following message will be displayed:

NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to

Multi-Point’ mode, wireless router is operated in wireless bridge

dedicated mode – wireless router is only used to expand the scope of

network, and no wireless clients will be accepted. If you want to use

your wireless router to expand the scope of network, and also accept

wireless clients, please select ‘AP Bridge-WDS’ or ‘Universal

Repeater‘ mode.