User's Manual

2-2 Connecting to wireless broadband router by web browser

After the network connection is built, the next step you should do is

setup the router with proper network parameters, so it can work properly

in your network environment.

Before you can connect to the router and start configuration

procedures, your computer must be able to get an IP address

automatically (use dynamic IP address). If it’s set to use static IP address,

or you’re unsure, please follow the following instructions to configure

your computer to use dynamic IP address:

If the operating system of your computer is….

Windows 95/98/Me - please go to section 2-2-1

Windows 2000 - please go to section 2-2-2

Windows XP - please go to section 2-2-3

Windows Vista - please go to section 2-2-4

2-2-1 Windows 95/98/Me IP address setup:

1. Click ‘Start’ button (it should be located at lower-left corner of your

computer), then click control panel. Double-click Network icon, and

Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.