User's Manual

characters of key will be displayed. For example, if

you select ’64-bit’ as key length, and ‘Hex’ as key

format, you’ll see the message at the right of ‘Key

Format’ is ‘Hex (10 characters), which means the

length of WEP key is 10 characters.

Default Tx Key (4): You can set up to four sets of WEP key, and you can

decide which key is being used by default here. If

you don’t know which one you should use, select

‘Key 1’.

Encryption Key Input WEP key characters here, the number of

1 (5): characters must be the same as the number

displayed at ‘Key Format’ field. You can use any

alphanumerical characters (0-9, a-z, and A-Z) if

you select ‘ASCII’ key format, and if you select

‘Hex’ as key format, you can use characters 0-9, a-f,

and A-F. You must enter at least one encryption key

here, and if you entered multiple WEP keys, they

should not be same with each other.

Enable 802.1x IEEE 802.1x is an authentication protocol. Every

Authentication (6): user must use a valid account to login to this

wireless router before accessing the wireless LAN.

The authentication is processed by a RADIUS server.

This mode only authenticates user by IEEE 802.1x,

but it does not encryption the data during

communication. If there is a RADIUS server in you

environment, please enable this function. Check this

box and another sub-menu will appear:

RADIUS Server Please input the IP address of radius

IP address (8): server here