User's Manual

Here are descriptions of every setup items:

Enable WPS (1): Check this box to enable WPS function, uncheck it

to disable WPS.

WPS Information (2):WPS-related system information will be displayed

here:

WPS Status: If the wireless security (encryption)

function of this wireless router is properly set, you’ll

see ‘Configured’ message here. If wireless security

function has not been set, you’ll see ‘unConfigured’.

PinCode Self: This is the WPS PIN code of this

wireless router. This code is useful when you need to

build wireless connection by WPS with other

WPS-enabled wireless devices.

SSID: The SSID of this wireless router will be

displayed here.

Authentication Mode: The wireless security

authentication mode of this wireless router will be

displayed here. If you don’t enable security function

of the wireless router before WPS is activated, the

router will auto set the security to WPA (AES) and

generate a set of passphrase key for WPS

connection.

Passphrase Key: The wireless security key of the

router will be displayed here.

Configure Click ‘Start PBC’ to start Push-Button style WPS

by Push Button (3): setup procedure. This wireless router will wait for

WPS requests from wireless clients for 2 minutes.

The ‘WLAN’ LED on the wireless router will be

steady on for 2 minutes when this wireless router is

waiting for incoming WPS request.