User's Manual Part 2

Default Gateway

Enter the default gateway of the destination

network.

Hop Count

Enter the hop count (the

distance between

destination network and this broadband

router) here.

Interface

Enter the interface which leads to

destination network.

Add

Add the route to the current static routing

table.

Static Routing Table entries will be displayed in the table shown below:

Delete Selected/

Delete All

Delete selected or all entries from the table.

III-3-8-2. Port Forwarding

This function allows you to redirect a single port or consecutive ports of an

Internet IP address to the same port of a local IP address. The port number(s)

of the Internet IP address and local IP address must be the same.

If the port number of the Internet IP address and local IP address is different,

please use the “Virtual Server” function instead.