Mini Wi-Fi travel router User Manual Version 1.
COPYRIGHT Copyright ©2011 by this company. All rights reserved.
CATALOG Chapter I: Product Information ...................................................................... 5 1-1 Introduction and safety information ................................................................ 5 1-2 Safety Information ........................................................................................... 6 1-3 System Requirements ...................................................................................... 7 1-4 Package Contents ..........................................
2-5-4-3 WPS ........................................................................................ 74 2-5-5 QoS ..................................................................................................... 77 2-5-6 NAT .................................................................................................... 80 2-5-6-1 Special Applications................................................................ 81 2-5-6-2 UPnP Settings .............................................................
Chapter I: Product Information 1-1 Introduction and safety information Thank you for purchasing this mini 802.11b/g/n wireless travel router! The ultra-compact design allows you to bring this travel router with you everywhere, and still providing excellent network performance for you. This Mini wifi travel router is especially convenient for business travelers to access hotel or public wifi networks.
1-2 Safety Information In order to keep the safety of users and your properties, please follow the following safety instructions: 1. This Mini wifi travel router is designed for indoor use only. DO NOT expose this network card to direct sun light, rain, or snow. 2. DO NOT put this Mini wifi travel router at or near hot or humid places, like kitchen or bathroom. Also, do not left this Mini wifi travel router in the car in summer. 3.
1-3 System Requirements Wireless network card which is compatible with 802.11b/g/n wireless network standard.
1-4 Package Contents Before you start to use this mini travel router, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items: □ Mini wifi travel router (1 pcs) ……..………………..…………… 1 □ Quick installation guide (1 pcs) ………………………………….
1-5 Familiar with your new Mini wifi travel router FRONT 3 1 4 2 ITEM USB Cable (1) Cable tray (2) LED (3) WPS / Reset Button (4) DESCRIPTION Connect to any active USB port to power travel router on Put USB cable in this tray when not in use This LED will light up when travel router is powered on, and will provide other indicator while device is working Press and release this button to activate WPS mode; Press and hold this button for more than 10** seconds to reset the settings of this travel router to
Off WPS Green No power/ No internet connection Steady ON When WPS connection is successful, turn on for 5 minutes. Blinking WPS is in progress, blinking (0.2 second on, 0.1 second off) for 2 minutes (waiting for WPS connection) Quick blinking WPS error, blinking (0.1 second on, 0.1 second off) off No power/No WPS in progress Back ITEM Ethernet Port DESCRIPTION Connect to ADSL, cable modem, or other network devices which provides Internet access.
CHAPTER II: Configuring Mini wifi travel router 2-1 Setup IP address Before starting to configure mini travel router, you can check whether your computer is using dynamic IP. This travel router uses DHCP to assign IP address to your computer automatically, therefore you don’t need to setup IP address of your computer manually; however, if your computer requires you to setup IP address manually, please refer to following instructions to setup IP address so you can configure travel router.
2-1-1 Windows XP IP address setup: Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network and Internet Connections icon, click Network Connections, and then double-click Local Area Connection, Local Area Connection Status window will appear, and then click ‘Properties’ Select ‘Use the following IP address’, then input the following settings in respective field: IP address: 192.168.2.
2-1-2 Windows Vista/7 IP address setup: Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control panel. Click View Network Status and Tasks, then click Manage Network Connections..Right-click Local Area Netwrok, then select ‘Properties’.
22 Connect to mini travel Router Insert the USB cable of Travel Router into an available USB port on your computer or USB power adapter to power on mini travel router. The Blue LED will turn on few seconds and start blinking when device is booting up. or Please wait 2 minutes for device booting up, the blue LED is blinking. After blue LED turns off, connecting your computer to Travel Router through wireless connection by searching the available wireless network.
TIP: The default SSID of this Travel Router can be found on the sticker labeled on the side of Travel Router. Next, input password and then click ‘OK’. Default password is ‘62586258’ as shown below. Please note that you have to enter correct password if you changed it. If the password you entered is wrong, you’ll be asked to input password again. After wireless connection is built successfully, you are able to use this mini travel router by wired LAN mode or wireless ISP mode.
If your internet source comes from wired LAN cable, Please insert LAN cable into LAN port of Travel Router, to connect Travel Router to LAN connection (ISP, or home / hotel / corporate network with DHCP enabled). PLEASE NOTE: NEVER CONNECT THIS ETHERNET PORT OF MINN TRAVEL ROUTER TO YOUR COMPUTER’S ETHERNET PORT DIRECTLY! Please check Blue LED of mini router device, if it is steady on, it means your intenet connection is ON, you should be able to access Internet now.
If your internet source comes from wireless ISP or any wireless access point, you need to login firmware to have further settings.
23 Connect to web configuration menu Anytime you want to setup Travel Router, please open web browser (IE, firefox, chrome etc.) and type the default SSID of Travel Router in address bar of web browser like shown below.
Default username is admin Default password is 1234 Click ‘OK’ button when ready. You should be able to see the configuration menu of Mini wifi travel router: Detailed operation instructions will be given to following chapters.
24 Quick Setup You can set travel router to operate in one of operation mode: Travel Router Mode, and Wireless ISP Mode. To access ‘Quick Setup’ menu, click ‘Quick Setup’ on the left.
Please select one operation mode: Travel Router Mode: Select this mode is you have a wired Ethernet connection and you want to convert it to wireless connection and share to multiple wireless client devices such like your mobile phone, tablet, notebook..and so on. You may need to make further setup on travel router if it’s not using DHCP to assign IP address. Wireless ISP Mode: Select this mode is your network service provider uses wireless network to provide you Internet service.
241 Travel Router Mode Travel router mode: This travel router will connect to Internet by wired network, and client uses wireless connection to access Internet. Select this mode and click NEXT button. Please setup wireless security of this Travel Router here if you want to change. Or you can use default value and click ‘NEXT’ button to continue.
device for wireless network) here, you can use any words which will help you to identify your own Travel Router. When you change this SSID, you must reconnect your computer to new SSID of Travel Router through wireless connection by searching the available wireless network Default is 6258gnlxxxx where ‘xxxx’ is the last 4 digit of Travel Router’s MAC address. Channel Number: Select wireless channel number, or you can select ‘Auto’ and Travel Router will select a channel for you automatically.
When you select WPA pre-shared key encryption: Please select one WPA Unicast Cipher Suite. WPA(TKIP) or WPA2(AES) for more security and WPA2 Mixed for more compability, and then select Pre-shared Key Format (Passphrase or Hex characters), and then input passphrase characters in ‘Pre-shared Key’ field. WPA Unicast Cipher Suite: Pre-shared Key Format: Pre-shared Key: Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed(WPA-TKIP & WPA2-AES Mixed).
WPA Unicast Cipher Suite (2): Please select a type of WPA cipher suite. Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your wireless client support the cipher you selected. RADIUS Server IP address (3): Please input the IP address of your Radius authentication server here. RADIUS Server Port (4): RADIUS Server Password (5): Please input the port number of your Radius authentication server here. Default setting is 1812.
Next, system will start verifying internet connection, please be patient. This message indicates Internet connection has been confirmed, please click ‘NEXT’ button to continue. Or shows failed connection, you should click ‘BACK’ button to redo previous settings. Recommend you to add the firmware web address of this Travel Router for future use, please select ‘Yes’ to add bookmark (Other browser than IE and Firefox, please copy URL and save it to your bookmark).
If you select ‘Yes’ in last step to add bookmark, you can define the name of bookmark here. Click ‘Add’ to add bookmark or ‘Cancel’ to abort. (Recommend you to add it) Please be patient while Travel Router is applying new settings.
242 Wireless ISP Mode Wireless ISP mode: This travel router will connect to Internet by wireless network, and client also uses wireless connection to access Internet. Select this mode and click NEXT button. Travel Router will perform wireless site survey. Please check the list and see if the access point(Wireless ISP) you wish to connect is listed here. If not, please click ‘Refresh’ button and / or move Travel Router closer to access point you with to connect.
In most cases you only have to select an access point and Travel Router will detect encryption type for you, you only have to input the correct WEP key or WPA passphrase of your access point. Click ‘NEXT’ button to continue. If the SSID of the access point you wish to connect is hidden, check ‘Setup manually’ box and input access point’s parameters manually.
This message indicates that WEP/WPA key is verified. Otherwise, you have to recheck WEP/WPA key you input in last step. Click ‘NEXT’ to continue. 2 Please input the wireless security settings for your wireless client here or you can use all default values without change. Then click ‘Apply’ button. SSID: Input the Service-Set IDentifier (a name used to identify this device for wireless network) here, you can use any words which will help you to identify your own Travel Router.
wireless connection by searching the available wireless network Default is 6258gnlxxxx where ‘xxxx’ is the last 4 digit of Travel Router’s MAC address. Encryption: Select wireless encryption mode: Disable: No security at all, everyone can establish connection. WEP: WEP encryption, less security and more compatiblity. WPA pre-shared key: WPA encryption, safer encrytion. WPA RADIUS: Select this option only when you have RADIUS server.
When you select WPA pre-shared key encryption: Please select one WPA Unicast Cipher Suite. WPA(TKIP) or WPA2(AES) for more security and WPA2 Mixed for more compability, and then select Pre-shared Key Format (Passphrase or Hex characters), and then input passphrase characters in ‘Pre-shared Key’ field. WPA Unicast Cipher Suite: Pre-shared Key Format: Pre-shared Key: Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed(WPA-TKIP & WPA2-AES Mixed).
WPA Unicast Cipher Suite (2): Please select a type of WPA cipher suite. Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your wireless client support the cipher you selected. RADIUS Server IP address (3): Please input the IP address of your Radius authentication server here. RADIUS Server Port (4): RADIUS Server Password (5): Please input the port number of your Radius authentication server here. Default setting is 1812.
(Other than IE/Firefox, it will pop up a message for asking to add bookmark manually) Please be patient while Travel Router is applying new settings. Note: For some WISP may require WAN setting, you can refer to ‘2-5-2 WAN Settings’ page to have more setting instructions.
25 Advanced Setup You can configure advanced settings of this Mini wifi travel router here. To access ‘Advanced Setup’ menu, click ‘Advanced Setup’ on the left. The following setup page will appear: The instructions on every setup item will be given in the following chapters.
251 System You can configure time zone and web menu password here. 2‐5‐1‐1 Time Zone Some functionality of this travel router requires date and time of provide service, and you can setup system time and time zone for this travel route here. The description of every setup item is listed as follow: Item Time Zone Time Server Address Description Select time zone from dropdown menu. Input the IP address or host name of time serve you wish to use.
Click ‘APPLY’ button to save changes you made in this page, or click ‘CANCEL’ to discard settings you made. When you finish settings in this page, click ‘Apply’ button. You’ll see the following message: If you still need to configure this Mini wifi travel router, click ‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Mini wifi travel router.
2‐5‐1‐2 Password Settings Change admin’s password at login Item Current Password New Password Re-Enter Password Description To change admin’s password, you have to input current password first. Input new password here. You can use the combination of alphabets, number, and symbols for up to 20** characters. Input new password again for conformation.
252 WAN Settings You can configure WAN (Wide Area Network) settings here, so you can get connected to Internet.
Please select the item you wish to configure from this menu, and click ‘More Configuration’ to configure detailed configuration (You can also select the item on the left side directly).
2‐5‐2‐1 Dynamic IP Select this item if your ISP will assign IP address to you automatically. The description of every setup item is listed as follow: **CLONE MAC ADDRESS missing?** Item Host Name Description Input host name here if it’s requested by your ISP. You can leave this field blank if your ISP does not request you to use host name. When you finish settings in this page, click ‘Apply’ button.
2‐5‐2‐2 Static IP Select this item if your ISP assigns an IP address to you, and requests you to input IP address manually. The description of every setup item is listed as follow: Item Description IP Address Input the IP address assigned by Internet Service Provider. Subnet Mask Input the subnet mask assigned by your Internet Service Provider. Default Gateway Input the IP address of the default gateway assigned by your Internet Service Provider.
‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Mini wifi travel router.
2‐5‐2‐3 PPPoE Select this item if your ISP requests you to use PPPoE (PPP over Ethernet) to establish connection. The description of every setup item is listed as follow: Item Description User Name Input PPPoE user name assigned by your Internet Service Provider. Password Please input the password assigned by your Internet Service Provider. Service Name Please give a name to this Internet service, this is optional.
from client Manual: You have to connect or disconnect PPPoE connection manually (by click ‘Connect’ and ‘Disconnect’ button. Idle Time Out Please specify the time to shutdown Internet connect after no internet activity is detected in minute(s) from 1 to 1000. This option is only available when connection type is ‘Connect on Demand’. When you finish settings in this page, click ‘Apply’ button.
2‐5‐2‐4 PPTP Select this item if your ISP requests you to use PPTP to establish connection. The description of every setup item is listed as follow: Item Description Obtain an IP address Automatically Select this item to acquire an IP address from ISP automatically (if your ISP requests you to do so). You may also input hostname if your ISP requests you to do so. Use The Following IP Address Select this item if your ISP requests you to input IP address manually (in 3 fields below).
Service Provider. Subnet Mask Input the subnet mask assigned by your Internet Service Provider. Default Gateway Input the IP address of PPTP default gateway. User Name Input the user name of PPTP connection server. Password Input the password of PPTP connection server. PPTP Gateway Input the IP address of PPTP default gateway. Connection ID Input connection ID assigns by your ISP (only when requested by your ISP).
If you still need to configure this Mini wifi travel router, click ‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Mini wifi travel router.
2‐5‐2‐5 L2TP Select this item if your ISP requests you to use L2TP to establish connection. The description of every setup item is listed as follow: Item Description Obtain an IP address Automatically Select this item to acquire an IP address from ISP automatically (if your ISP requests you to do so). You may also input hostname if your ISP requests you to do so. Use The Following IP Address Select this item if your ISP requests you to input IP address manually (in 3 fields below).
Default Gateway Input the IP address of L2TP default gateway. User Name Input the user name of L2TP connection server. Password Input the password of L2TP connection server. L2TP Gateway Input the IP address of L2TP default gateway. Connection ID Input connection ID assigns by your ISP (only when requested by your ISP). MTU Please input the MTU value of your network connection here (from 512 to 1492). If you don’t know which value you should use, you can use default value.
now, click ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Mini wifi travel router.
2‐5‐2‐6 Telstra Big Pond Select this item if you’re using Telstra Big Pong ISP in Australia. DO NOT use this item if you’re not using this ISP. The description of every setup item is listed as follow: Item Description User Name Input user name assigned by ISP here. Password Input password assigned by ISP here. Assign login server manually Check this box if you want to input login server’s IP address manually. You also have to input the IP address in the field below.
2‐5‐2‐7 DNS Input DNS (Domain Name Service) server’s IP address here. You may not need to input DNS server information here if your ISP will assign you IP address automatically, however, you can still assign one or two preferred DNS server here. The description of every setup item is listed as follow: Item Description Primary DNS Input the DNS server IP address here. Secondary DNS Input additional (backup) DNS server IP address here. When you finish settings in this page, click ‘Apply’ button.
2‐5‐2‐8 DDNS DDNS (Dynamic DNS) is a kind of service which provides hostname-to-IP service to ‘dynamic’ IP address users. ‘Dynamic IP’ means Internet service subscriber will obtain different IP address when he or she connects to Internet. Due to this nature, it will be difficult for dynamic IP users to provide services to general public, because the IP address is always changing.
register DDNS service. Password / Key Input the password / key you used to register DDNS service. When you finish settings in this page, click ‘Apply’ button. You’ll see the following message: If you still need to configure this Mini wifi travel router, click ‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Mini wifi travel router.
2‐5‐2‐9 WISP If your ISP uses wireless network to provide service, please use this setup menu: The description of every setup item is listed as follow: Item Description Disable / Enable Select ‘Enable’ to enable WISP function, or select ‘Disable’ to disable WISP. SSID Input the SSID of the access point you wish to connect, or you can click ‘Site Survey’ button to scan for access points nearby. Site Survey Click this button to scan for access points nearby and give you a list.
Encryption: WEP You have to input encryption details: Key Length: Select key length (64 or 128 bit) Key Format: Select key format (ASCII or Hex), and input the key characters in ‘Encryption Key’ field. Default Tx Key: Select WEP default Tx key here, generally it’s ‘Key 1’. Encryption Key: Input WEP key characters.
253 LAN You can change LAN (Local Area Network) settings here. The descriptions of every setup item are listed below: Item Name Description IP Address Input the IP address of the LAN port of this router here. Subnet Mask Input the subnet mask of the LAN port of this router here. 802.11d Spanning Tree If there’s 802.11d spanning tree compatible switch attached to any LAN port of this router, and you wish to use 802.
fields: Lease Time: Select lease time for each DHCP IP address lease (how long a client can keep the same IP address). DHCP Client Start IP: Input the starting IP address of DHCP IP pool. The network range must be the same as ‘IP address’ field above. DHCP Client End IP: Input the ending IP address of DHCP IP pool. The network range must be the same as ‘IP address’ field above. Domain Name: Input the domain name of your local network, this is optional.
When you finish settings in this page, click ‘Apply’ button. You’ll see the following message: If you still need to configure this Mini wifi travel router, click ‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Mini wifi travel router.
254 Wireless You can change wireless network settings here. To access Wireless settings menu, click ‘Wireless’ on the left: To setup wireless settings, please select one item from left.
2‐5‐4‐1 Basic Settings Setup basic wireless network settings: The descriptions of every setup item are listed below: Item Mode Description Band Select the wireless band: Select wireless operation mode: Access Point or Universal Repeater. 2.4GHz (B): only wireless clients with 802.11b capability can connect to this router. Maximum connection speed is 11Mbps. 2.4GHz (N): only wireless clients with 802.11n capability can connect to this router. Maximum connection speed is 150Mbps. 2.
‘Client’ mode). Wireless clients will use this SSID to identify this Mini wifi travel router. You can input up to 32 alphanumerical characters as SSID. SSID is used to identify this wireless router so wireless clients can identity this router from others. The SSID of this travel router is ‘6528GNLxxxx’, where xxxx is the last 4 characters of the MAC address. Channel Number Select the channel number of wireless radio.
only) To select an AP to connect, click ‘Select’ radio button of the AP you wish to connect, then click ‘Connect’; If the AP you wish to connect does not appear, click ‘Refresh’ button one or more times until you see it in the list, or move the Mini wifi travel router closer to the AP you wish to connect. When you finish settings in this page, click ‘Apply’ button.
2‐5‐4‐2 Advanced Settings Setup advanced wireless network settings: The descriptions of every setup item are listed below: Item Fragment Threshold RTS Threshold Beacon Interval DTIM Period Data Rate Description Set the Fragment threshold of wireless radio. Threshold: Do not modify default value if you don’t know what it is, default value is 2346. Set the RTS threshold of wireless radio. Do not modify default value if you don’t know what it is, default value is 2347.
select a value here, this access point will refuse to establish connection with wireless clients by other speed. N Data Rate Channel Width Preamble Type Broadcast ESSID CTS Protect TX Power It’s recommended to select ‘Auto’ and this mini wifi router will adjust the speed automatically. Select wireless data transfer speed by MCS0 to MCS7. MCS stands for Modulation and Coding Scheme, which represents different speed when bandwidth is 20MHz or 40MHz.
WMM password. Enable or disable Wireless Multi-Media. When enabled, wireless router will give priority to multimedia related network applications so they will have better performance. When you finish settings in this page, click ‘Apply’ button. You’ll see the following message: If you still need to configure this Mini wifi travel router, click ‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button.
2543 Security Settings Setup wireless security settings: SSID: Input the Service-Set IDentifier (a name used to identify this device for wireless network) here, you can use any words which will help you to identify your own Travel Router. When you change this SSID, you must reconnect your computer to new SSID of Travel Router through wireless connection by searching the available wireless network Default is 6258gnlxxxx where ‘xxxx’ is the last 4 digit of Travel Router’s MAC address.
select ‘ASCII’ key format, and if you select ‘Hex’ as key format, you can only use characters 0-9, a-f, and A-F.). When you select WPA pre-shared key encryption: Please select one WPA Unicast Cipher Suite. WPA(TKIP) or WPA2(AES) for more security and WPA2 Mixed for more compability, and then select Pre-shared Key Format (Passphrase or Hex characters), and then input passphrase characters in ‘Pre-shared Key’ field.
Here are descriptions of every setup items: WPA Unicast Cipher Suite (2): Please select a type of WPA cipher suite. Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your wireless client support the cipher you selected. RADIUS Server IP address (3): Please input the IP address of your Radius authentication server here.
2‐5‐4‐4 Access Control This function will help you to prevent unauthorized users from connecting to your wireless router; only those wireless devices who have the MAC address you assigned here can gain access to your wireless router. You can use this function with other security measures described in previous section, to create a safer wireless environment. Up to 20 MAC addresses can be assigned by using this function.
here, please click ‘Delete All’ button. Enable To enforce MAC address filtering, Access Control (4): you have to check ‘Enable Wireless Access Control’. When this item is unchecked, wireless router will not enforce MAC address filtering of wireless clients. MAC Address (5): Input the MAC address of your wireless devices here, dash ( - ) or colon ( : ) are not required. (i.e. If the MAC address label of your wireless device indicates ‘aa-bb-cc-dd-ee-ff’ or ‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’.
Please click ‘Continue’ to back to previous setup menu; to continue on other setup procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting). If you want to reset all settings in this page back to previously-saved value, please click ‘Cancel’ button.
2‐5‐4‐3 WPS Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and this wireless router. You don’t have to select encryption mode and input a long encryption passphrase every time when you need to setup a wireless client, you only have to press a button on wireless client and this wireless router, and the WPS will do the rest for you. This wireless router supports two types of WPS: Push-Button Configuration (PBC), and PIN code.
Here are descriptions of every setup items: Enable WPS (1): Check this box to enable WPS function, uncheck it to disable WPS. WPS Information (2):WPS-related system information will be displayed here: WPS Status: If the wireless security (encryption) function of this wireless router is properly set, you’ll see ‘Configured’ message here. If wireless security function has not been set, you’ll see ‘unConfigured’. PinCode Self: This is the WPS PIN code of this wireless router.
settings of wireless client for WPS connection. Configure Click ‘Start PBC’ to start Push-Button style WPS by Push Button (4): setup procedure. This wireless router will wait for WPS requests from wireless clients for 2 minutes. The ‘WPS’ LED green color on this device will be blinking for 2 minutes when this wireless router is waiting for incoming WPS request. Configure by client PinCode (5): Please input the PIN code of the wireless client you wish to connect, and click ‘Start PIN’ button.
255 QoS QoS (Quality of Service) function allows you to give a certain amount of bandwidth to important applications (such as video conference and network phone), so they can have enough bandwidth when working.
Enable QoS Total Download Bandwidt h Total upload Bandwidt h Add Check this box to enable QoS function. Input the download bandwidth of your Internet connection in Kbits. You can use dropdown menu to select a download line speed, or input it directly in the field. Input the upload bandwidth of your Internet connection in Kbits. You can use dropdown menu to select a upload line speed, or input it directly in the field.
Remote IP Address Input the remote IP addresses range which will be using this QoS rule (Input starting address on the left, and ending address on the right). If only one IP address is involved, input the address in left field only. Remote port range: Input remote port numbers which will trigger this QoS rule. You can ports such as ‘1-100’ or ‘1,3,5,7,9’ , or input a single port number here. Traffic type: Input the traffic type of this QoS rule from dropdown menu.
now, click ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Mini wifi travel router. 256 NAT NAT (Network Address Translation) function lets certain network application to be able to work behind firewall.
2‐5‐6‐1 Special Applications For those applications which require multiple connections to work properly, you may need to configure NAT in advance. The descriptions of every setup item are listed below: Item Enable Special Applications IP Address Computer Name Description Check this box to enable NAT for special applications. Input the IP address which will be using this rule.
Add Reset Select Delete Delete All Reset Click this button to add this rule. Click this button to clear all texts on fields above. Check the box of a certain rule for deletion. Delete selected rules. Delete all rules. Unselect any selected rules. When you finish settings in this page, click ‘Apply’ button. You’ll see the following message: If you still need to configure this Mini wifi travel router, click ‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button.
2‐5‐6‐2 UPnP Settings If your computer or network devices support UPnP, you can enable this function to allow then to see this travel router. If you don’t know if you should enable this function, select ‘Enable’. When you finish settings in this page, click ‘Apply’ button. You’ll see the following message: If you still need to configure this Mini wifi travel router, click ‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button.
257 Firewall Firewall function protects your computer on local area network so they won’t be attacked by malicious attackers on Internet, and helps you to protect information stored on your local computer.
2‐5‐7‐1 Access Control You can only allow certain computer on your local network to access Internet, or deny certain computer on your computer from accessing Internet. The descriptions of every setup item are listed below: Item Enable MAC Filtering Client PC MAC Address Computer Name Comment Add Reset Select Description Check this box to enable computer filtering based on MAC address. You also have to select ‘Deny’ or ‘Allow’ to deny or allow computers on the list to access Internet.
Delete Delete All Reset Enable IP Filtering Add PC Delete selected rules. Delete all rules. Unselect any selected rules. Check this box to enable computer filtering based on IP address and application. You also have to select ‘Deny’ or ‘Allow’ to deny or allow computers on the list to access Internet. Click this button to add a new computer for IP filter: Client PC description: Input any text here to help you to identify this computer.
Client Service: Check all services which will be involved in this rule. Protocol: Select the network protocol (TCP or UDP) Port range: Input the port range of this rule like 1-100 or ‘1,3,5,7,9’, or a single port number. Delete Delete All Click ‘Add’ button to save changes, or click ‘Reset’ button to clear this rule. Delete selected rules. Delete all rules. When you finish settings in this page, click ‘Apply’ button.
2‐5‐7‐2 URL Blocking You can prevent local computers from accessing certain web sites on Internet. The descriptions of every setup item are listed below: Item Enable URL Blocking Add Reset Select Delete Delete All Reset Description Check this box to enable URL Blocking function. You have to input a part of web address or full web address in ‘http://’ field, like ‘www.website.com’ or ‘website’. Click this button to add this rule. Click this button to clear web address field.
If you still need to configure this Mini wifi travel router, click ‘CONTINUE’ button; if you want to save changes and make it work now, click ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Mini wifi travel router.
2‐5‐7‐3 DoS The firewall of this travel router can prevent the malicious DoS (Denial-of-Service) attack from Internet. The descriptions of every setup item are listed below: Item DoS Module Advance d Settings Description Please check all boxes of the DoS function you wish to activate. If you don’t know which one you should use, you can select all without any problem.
Discard Ping from WAN: Check this box and this travel router will not answer ping requests from Internet. Port Scan: Check all types of port scan you want to prevent. Sync Flood: You can specify the frequency of sync flood packets which will trigger this DoS function. Click ‘APPLY’ button to save changes you made, or click ‘CANCEL’ to discard changes you made. When you finish settings in this page, click ‘Apply’ button.
26 Status You can check the status of this travel router by this function.
261 Internet Connection You can check the connection type and status of Internet connection.
262 Device Status You can check the wireless and LAN status here.
263 System Log You can check the system message of this travel router since it is powered on. If there’s any problem when you’re using this travel router, these log information may help. You can click ‘Save’ button to save system log as a text file on your computer, click ‘Clear’ to delete all messages, or click ‘Refresh’ to reload latest messages.
264 Security Log You can check security related messages of this travel router. You can click ‘Save’ button to save system log as a text file on your computer, click ‘Clear’ to delete all messages, or click ‘Refresh’ to reload latest messages.
265 Active DHCP Client You can check all DHCP clients connected to this travel router here. Click ‘Refresh’ button to reload latest DHCP clients.
266 Statistics You can check the network statistics of this travel router. You can click ‘Refresh’ button to reload statistics.
27 Tools You can use some special tools to configure the fundamental functions of this travel router here, like configuration back and firmware upgrade.
271 Configuration Tools You can backup and restore travel router’s configuration in this page. To save travel router’s configuration, click ‘Save’ button and you’ll be prompted to save configuration file to a folder on your computer. To restore a saved configuration, click ‘Browse’ button and you’ll be prompted to locate a saved configuration file on your computer, and then click ‘Upload’ button to upload configuration file to travel router.
272 Firmware Upgrade You can upgrade the firmware of this travel router to obtain new functionality. 1. Click ‘Next’ button to start firmware Upgrade 2. Click ‘Browse’ button to locate firmware file on your computer (.bin file), and then click ‘APPLY’ button to start firmware upload. You’ll be prompted to confirm firmware upgrade.
273 Reset You can reset (reboot) this travel router in case it’s not working properly. Click ‘APPLY’ button to reset the travel router. It requires 1 to 2 minutes for travel router to complete boot procedure.
Chapter III: Appendix 31 Specification Ethernet Port (WAN/LAN): 10/100M UTP Port x 1 Power: DC 5V 0.5A via USB bus power Dimension: 65(L) x 15.25(W) x 21.5(H) mm Transmit Power: 11n: 14dBm±1.5dBm, 11g: 14dBm±1.5dBm, 11b: 17dBm±1.
32 Troubleshooting If you encounter any problem when you’re using this wireless network card, don’t panic! Before you call your dealer of purchase for help, please check this troubleshooting table, the solution of your problem could be very simple, and you can solve the problem by yourself! Scenario I can’t find any wireless access point / wireless device in ‘Site Survey’ function. I can not establish connection with a certain wireless access point Solution 1.
The network is slow / having problem when transferring large files Router is not responding to me when I want to access it by web browser with encryption. Please contact the owner of access point to ask for correct passphrase / security key. 4. The access point you wish to connect only allows network cards with specific MAC address to establish connection.
d. e. f. I can’t locate my router by my wireless client a. b. c. File download is very slow or breaks frequently a. b. c. d. e. I can’t log onto web management interface: password is wrong a. b. c. Try to connect the router by another computer and see if it works; if not, please restore your router to factory default settings (pressing ‘reset’ button for over 10 seconds). Set your computer to obtain an IP address automatically (DHCP), and see if your computer can get an IP address.
Router become hot d. If you really forget the password, do a hard reset. a. This is not a malfunction, if you can keep your hand on the router’s case. b. If you smell something wrong or see the smoke coming out from router, please disconnect the router and unplug USB cable to power it off (make sure it’s safe before you’re doing this!), and call your dealer of purchase for help.
33 Glossary 1. What is the IEEE 802.11g standard? 802.11g is the new IEEE standard for high-speed wireless LAN communications that provides for up to 54 Mbps data rate in the 2.4 GHz band. 802.11g is quickly becoming the next mainstream wireless LAN technology for the home, office and public networks. 802.11g defines the use of the same OFDM modulation technique specified in IEEE 802.11a for the 5 GHz frequency band and applies it in the same 2.4 GHz frequency band as IEEE 802.11b. The 802.
5. What is Infrastructure? An integrated wireless and wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable to enterprise scale for wireless access to central database, or wireless application for mobile workers. 6. What is BSS ID? A specific Ad hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID. 7.
12. What is DSSS? What is FHSS? And what are their differences? Frequency-hopping spread-spectrum (FHSS) uses a narrowband carrier that changes frequency in a pattern that is known to both transmitter and receiver. Properly synchronized, the net effect is to maintain a single logical channel. To an unintended receiver, FHSS appears to be short-duration impulse noise. Direct-sequence spread-spectrum (DSSS) generates a redundant bit pattern for each bit to be transmitted.
34 FCC and Other Compliance Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Federal Communication Statement Commission (FCC) Radiation Exposure This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 0.5cm between the radiator & your body.
None.
