AC600 Wireless LAN Dual Band Selectable Travel Router (2.4GHz: 150Mbps, 5GHz: 433Mbps) User’s Manual Version: 1.
COPYRIGHT Copyright ©2014 by this company. All rights reserved.
Federal Communication Commission Interference Statement FCC Part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
4RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
CATALOG Chapter I: Product Information..................................................................................... 7 1-1 Introduction and safety information ................................................................ 7 1-2 Safety Information .......................................................................................... 8 1-3 System Requirements ...................................................................................... 9 1-4 Package Contents .............................
Chapter I: Product Information 1‐1 Introduction and safety information Thank you for purchasing this AC600 Wireless LAN dual band travel router! This cost-effective router is the best choice for Traveler / Hotel Room users, all computers and network devices can share a single xDSL / cable modem internet connection at high speed. With built-in both 2.4GHz and 5GHz radios, this router supports both of the IEEE 802.11b/g/n and 802.
1‐2 Safety Information In order to keep the safety of users and your properties, please follow the following safety instructions: 1. This router is designed for indoor use only; DO NOT place this router outdoor. 2. DO NOT put this router at or near hot or humid places, like kitchen or bathroom. Also, do not left this router in the car in summer. 3. DO NOT pull any connected cable with force; disconnect it from the router first. 4.
1‐3 System Requirements z z Internet connection, provided by xDSL or cable modem with a RJ-45 Ethernet port. Computer or network devices with wired or wireless network interface card. Web browser (Microsoft Internet Explorer, Google Chrome, Firefox or z Safari web browser). An available USB Port or USB power adapter (Output: DC5V/0.
1‐4 Package Contents Before starting to use this router, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items: □ Broadband Wireless Travel Router (1 pcs) □ Quick Installation Guide (1 pcs) □ User Manual CD-ROM (1 pcs) 10
1‐5 Familiar with your new wireless broadband router LED indication LED Indication Definition WLAN Travel Router mode: On Solid: Wireless WPS function is enabled. Blinking: Wireless LAN activity (transferring or receiving data). Wireless ISP mode: On Solid: Wireless WPS function is enabled. Blinking: Wireless LAN activity (transferring or receiving data). Ethernet On Solid: Ethernet port is connected. Blinking: Ethernet port activity (transferring or receiving data).
Function Panel Definition Reset Press and hold 2~5 seconds to do system reboot, Press and hold > 5 seconds till SYS LED is blinking to do restore all settings to factory defaults WPS Press and hold WPS button for 3 seconds till WLAN LED is On Solid to start WPS H/W PBC. 5G band Switch to 5G, WiFi of Travel Router will run on 5G band, 11a/n/ac mode. 2.4G band Switch to 2.4G, WiFi of Travel Router will run on 2.4G band, 11b/g/n mode. USB Cable For Travel router power supply only.
Chapter II: System and Network Setup 2‐1 Build network connection Please follow the following instruction to build the network connection between your new Travel router and your computers, network devices: 1. Connect your xDSL / cable modem or hotel LAN cable to the WAN port of Travel Router by Ethernet cable. 2.
2‐2 Network setup Please use the web browser to configure the wireless router. A computer with wireless LAN connection to the wireless router is required for this first-time configuration. 1. Site survey by Windows Zero Configure, you can find Travel Router call the “6288ACLxxxx”, please select and connect.
2. Start the web browser and input the IP address of wireless router in address bar, and the following message should be shown. Default IP: 192.168.2.1 3. Please input user name and password, then click ‘OK’ to access web management interface of wireless router. Default User name: admin Default Password: 1234 4. The wireless router have two operation modes (Traver Route / Wireless ISP), factory default mode is “Travel router ”.
wireless router, please click “Setup Wizard”. NOTE: If you can’t see the web management interface, and you’re being prompted to input user name and password again, it means you didn’t input username and password correctly. Please retype user name and password again. If you’re certain about the user name and password you type are correct, please go to ‘4-2 Troubleshooting’ to perform a factory reset, to set the password back to default value.
Chapter III WEB GUI configuration 3‐1 Setup Wizard The setup wizard will guide you to configure Travel Router for first time. Please follow the setup wizard step by step. Welcome to Setup Wizard, please click “Next”. 3‐1‐1 Travel Router mode Select this mode is you have a wired Ethernet connection and you want to convert it to wireless connection and share to multiple wireless client devices such like your mobile phone, tablet, notebook..and so on.
Wireless Basic Function Setting: You can setting wireless band, wireless network name (SSID), channel width, data rate and channel number, then click “Next”’ when you finish. Wireless Security Setting: You can setting encryption for your wireless security, then click “Finished”’ when you finish.
Change Setting Successfully: Please press “Reboot Now” to restart the wireless router to make the changes take effect. Add the URL to your bookmark (my favorite list) Default: "Save" (we recommend you to save it for quick access to the Web setting page next time) (Supports IE and Firefox only.
3‐1‐2 Wireless ISP mode Select this mode is your network service provider uses wireless network to provide you Internet service. (In this mode, Ethernet port configure become to the LAN port.) Select operation mode: Please select “Wireless ISP” mode, then click “Next”.
Wireless Site Survey: Please click “Site Survey” button to find WiFi AP in your area. This page provides tool to scan the wireless network. If any Access Point or IBSS is found, you could choose to connect it manually. Please select a Root wireless AP and click “Next”.
Root AP Wireless Security Key: Please setting encryption for the Root AP just you selected, then click “Next”’ when you finish. Wireless Network Name and Encryption Setting: You can setting SSID and Encryption of wireless router for your wireless device, then click “Connect”’ when you finish.
Connect Successfully: Please press “Reboot Now” to restart the wireless router to make the changes take effect. Add the URL to your bookmark (my favorite list) Default: "Save" (we recommend you to save it for quick access to the Web setting page next time) (Supports IE and Firefox only.
3‐2 Advanced Setup This page allows you setting LAN IP, Password and Firmware upgrade to new version. Please note: do not power off the device during the Firmware upgrade because it may crash the system. LAN IP Setup: You can enable the Travel Router's DHCP server to dynamically allocate IP Addresses to your LAN client devices.
Router must have an IP Address in the Local Area Network. Password Settings: You can change the User Name and Password required while logging into the Travel Router's web-based management system. By default, the password is 1234. So please assign a password to the Administrator as soon as possible, and store it in a safe place. Passwords can contain 1 to 30 alphanumeric characters, and are case sensitive.
Firmware Upgrade: This tool allows you to upgrade the Travel Router's system firmware. Enter the path and name of the upgrade file and then click the APPLY button below. You will be prompted to confirm the upgrade. The system will automatically reboot the router after you finished the firmware upgrade process. Please note: Do not power off the device during the Firmware upgrade because it may crash the system.
Travel Router. 3‐4 Status The Travel Router's status information provides the following information about your Travel Router: Hardware/Firmware version, MAC address and its current operating status.
Internet Connection: View the current internet connection status and related information. Device Status: View the current setting status of this device.
Chapter IV: Appendix 4‐1 Hardware Specification CPU: REALTEK RTL8881AM RF: REALTEK RTL8881AM Flash: 2MB SDRAM RAM: 8MB (CPU inside) WAN/LAN Port: 10/100M Port x 1 Antenna: Internal PIFA Antenna x 2 (2.4G x 1, 5G x 1) Power: DC 5V/0.5A USB port power or 5V/0.6A Switching Power Adapter Dimension: 54 (L) x 36.5 (W) x 16 (H) mm Temperature: Operating: 0~40C Storage: -20~60C Humidity: Operating: 10~90% (Non-Condensing) Storage: Max.
4‐2 Troubleshooting If you found the router is working improperly or stop responding to you, don’t panic! Before you contact your dealer of purchase for help, please read this troubleshooting first. Some problems can be solved by you within very short time! Scenario Router is not responding to me when I want to access it by web browser Can’t get connected to Internet Solution a. Please check the connection of power cord and network cable of this router.
d. e. f. g. h. i. I can’t locate my router by my wireless client a. b. c. d. File download is very slow or breaks frequently a. b. c. d. e. I can’t log onto web a. management interface: password is wrong b. with your computer directly attached to the device provided by your Internet service provider. Check PPPoE / L2TP / PPTP user ID and password again. Call your Internet service provide and check if there’s something wrong with their service.
Router become hot ‘Caps Lock’ light is not illuminated. c. If you really forget the password, do a hard reset. a. This is not a malfunction, if you can keep your hand on the router’s case. b. If you smell something wrong or see the smoke coming out from router or A/C power adapter, please disconnect the router and A/C power adapter from utility power (make sure it’s safe before you’re doing this!), and call your dealer of purchase for help.
4‐3 Glossary Default Gateway (Router): Every non-router IP device needs to configure a default gateway’s IP address. When the device sends out an IP packet, if the destination is not on the same network, the device has to send the packet to its default gateway, which will then send it out towards the destination. DHCP: Dynamic Host Configuration Protocol. This protocol automatically gives every computer on your home network an IP address.
1’s followed by consecutive trailing 0’s, such as 11111111.11111111.11111111.00000000. Therefore sometimes a network mask can also be described simply as “x” number of leading 1’s. When both are represented side by side in their binary forms, all bits in the IP address that correspond to 1’s in the network mask become part of the IP network address, and the remaining bits correspond to the host ID. For example, if the IP address for a device is, in its binary form, 11011001.10110000.10010000.
Telnet TCP FTP TC 23 P 21 SMTP TCP 25 POP3 TCP 110 H.323 TCP 1720 SNMP UCP 161 SNMP Trap UDP 162 HTTP TCP 80 PPTP TCP 1723 PC Anywhere TCP 5631 PC Anywhere UDP 5632 PPPoE: Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a secure data transmission method originally created for dial-up connections; PPPoE is for Ethernet connections. PPPoE relies on two widely accepted standards, Ethernet and the Point-to-Point Protocol.
layer protocol. WAN: Wide Area Network. A network that connects computers located in geographically separate areas (e.g. different buildings, cities, countries). The Internet is a wide area network. Web-based management Graphical User Interface (GUI): Many devices support a graphical user interface that is based on the web browser. This means the user can use the familiar Netscape or Microsoft Internet Explorer to Control/configure or monitor the device being managed.
