User's Manual

Reset (12): Unselect all mappings.

After you finish with all settings, please click ‘Apply’ (13) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on

other setup procedures, or click ‘Apply’ to reboot the router so the

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved

value, please click ‘Cancel’ button.

3-2-3 Virtual Server

This function allows you to redirect a port on Internet IP address (on

WAN port) to a specified port of an IP address on local network, so you

can setup an Internet service on the computer on local network, without

exposing it on Internet directly. You can also build many sets of port

redirection, to provide many different Internet services on different local

computers via a single Internet IP address.

Please click ‘NAT’ menu on the left of web management interface, then

click ‘Virtual Server’, and the following message will be displayed on

your web browser: