User's Manual

Please click ‘Continue’ to back to previous setup menu; to continue on

other setup procedures, or click ‘Apply’ to reboot the router so the

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved

value, please click ‘Cancel’ button.

2-5-4 Setup procedure for ‘PPTP’:

PPTP requires two kinds of setting: WAN interface setting (setup IP

address) and PPTP setting (PPTP user name and password). Here we start

from WAN interface setting:

Select the type of how you obtain IP address from your service provider

here. You can choose ‘Obtain an IP address automatically’ (equal to

DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the

following IP address’ (i.e. static IP address)

WAN interface settings must be correctly set, or the Internet connection