User's Manual

Number (3): routers must use the same setting.

MAC

address (4): Input the MAC address of another wireless router.

Set Click to set security settings for this connection

Security (5): (Please go to section ‘2-7-3 Wireless Security’

for detailed instructions).

2-7-1-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’:

In this mode, you can connect your wireless router with at least four

wireless routers to expand the scope of wireless network, and all clients

(wired only – AP will not accept wireless clients in this mode) of the

wireless routers will think they’re on the same physical network.

Here are descriptions of every setup items:

Band (2): Select the band you want to use, all the wireless

routers must use the same setting.

Channel Select the channel you want to use, all the wireless

Number (3): routers must use the same setting.

MAC address Input the MAC address of other wireless routers.