- Edimax Broadband Router User's Manual

44
Add/Edit Share
Parameters Description
Share Input the share name.
Path
Click on “Open” to open the path selecting window to select the sharing folder. Or click
share all USB disks to share whole disks.
Users
Select the user that can access this shared folder and press “Add” to add into list or press
“Add All” to add all users into list. You also can select the users in “Share Users” and click
on “Del” to remove from the list or press “Del All” to remove all users from list.
Authority Select the access right of this sharing. You can select “Read Only” for read only sharing or
select “Read & Write” to give users full access right.
Comment Fill the share comments for this share item here.
Shared to Selecting the share method that you want to use. You can share via FTP or share via
neighborhood.
Click <Save> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)
NOTE: Each user can only have one FTP share; it’s restricted to add two or more FTP shares to the same user.
NOTE: For a partition which owns NTFS file system, you can follow below procedures to share them.
(i) Switch to “NAS System -> Advanced” page”.
(ii) Check on “Read Only” to give read authority on the NTFS partition and save it.
Open Dialog
When you click the “Open” button, you can see the following pop-up window that shows the USB storage devices.
Please select the USB devices from left panel, the right bottom panel will show the directories in this USB storage device.
Choose the folder you want to share, and click “Submit” to select this folder for sharing. You can also click “New Folder”
to create a new share folder.
NOTE: Only the folders in USB storage devices will be shown as icons in Open Dialog due to the share function is
restricted to folders, not files.