- Edimax Wireless LAN Access Point User's Manual

Introduction
y Antenna Connector
This round connection is standard Reverse SMA connector where any
antennas with Reverse SMA connector can connect to the Access Point.
y DC Adapter Port
Insert the power jack of the power adapter into this port.
y LAN Port
The Access Point’s LAN port is where you connect to your LAN’s network
devices.
y Reset
The Reset button allows you to do one of two things.
1) If problems occur with your Access Point, press the reset button with
a pencil tip (for less than 4 seconds) and the Access Point will re-
boot itself, keeping your original configurations.
2) If problems persist or you experience extreme problems or you
forgot your password, press the reset button for longer than 4
seconds and the Access Point will reset itself to the factory default
settings (warning: your original configurations will be replaced with
the factory default settings).
4