User's Manual

NOTE: The PrintSir may require up to a minute after

power-up to log into a NetWare Directory Services

context because of the large number of

calculations NDS security requires.

Your PrintSir should now be ready for use by

workstation users. You should be able to redirect printing

to your PrintSir using a CAPTURE command.

5.3.2.2 Configuring as Remote Printer Mode

This remote printer feature is not available for the

10/100Mbps 3-port PrintSir models. Make sure that you

have created the NetWare print server with Type Remote

using PCONSOLE utility before you configure the PrintSir.

For more detailed information about PCONSOLE, please

refer to NetWare‘s manual. You can set up the NetWare

print server, print queue and printer objects by following

the steps below:

1. Run the NetWare PCONSOLE program.

2. Change the current context, if necessary, using

the Change Context menu selection.

3. Choose Quick Setup from the menu.