Web Smart Switch User's Manual

User Manual

4-2-10. Trap Event Configuration

Function name:

Trap Event Configuration

Function description:

The Trap Events Configuration function is used to enable the Advanced Smart

Ethernet Swi tch to send o ut the trap inform ation whil e pre-defi ned trap events

occurred.

Switch management offers 7 different trap events and 2 host to users .The

message will be sent while users tick (;) the trap even t indi vi duall y on the

web page shown as below. Except Warm Boot and Cold Boot, other trap

events offer the counter function to help the user see the times that the trap

event had happened.

Parameter description:

These trap functions are as they describe. The traps the switch supports are

listed below.

Boot: Warm Boot, Cold Boot

Link: Link Up, Link Down

T x/Rx error: Rx error threshold, T x error threshol d

Fig. 4-20

Publication date: January, 2005

Revision A1