0/100/1000BaseT to 1000BaseSX/LX Media Converter Series User’s Manual
FCC Warning This device has been tested and found to comply with limits for a Class B digital device, pursuant to Part 2 and 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Introduction This Gigabit Ethernet Media Converter Series is designed to bridge a 10/100/1000BaseT(X) signal to a 1000BaseSX/LX signal. It’s used to extend the distance connection between two Gigabit Ethernet twisted-pair devices via fiber cables transparently without any performance degradation. This Media Converter Series is based on the switching hub design. It supports Auto-Negotiation and Flow Control function on the twisted-pair port.
Key Features Compliant with IEEE 802.3 10BaseT, IEEE 802.3u,100BaseTX, IEEE 802.3ab 1000BaseT and IEEE 802.
II. TP port (RJ-45) The device TP port support Auto-MDIX, Auto-Negotiation and Flow Control functions. The cable length up to 100 meters is for Cat5, Cat5e or Cat6 shielded/unshielded twisted-pair cable. III. The Fiber Port There’re different types of fiber connectors, such as SC, LC and SFP for multi-mode or single-mode fiber cables. IV. DIP Switch Setting: (LLF/LFP Function) V.
connect. Note : Warning : When the setting of the DIP switch is changed, the power has to be turned off and the new setting will be effective after turned on again.
LEDs LED Indicators of Fast Ethernet Media Converter LED Power LINK/ACT 10/100M/ACT 1000M/ACT Status On On Flashing On Flashing On Flashing Description Power on Fiber Link Data active Link on 10/100M Data active Link on 1000M Data active Connections Multi-Mode Fiber (MMF) Single-Mode Fiber (SMF) 7
Technical Specifications Standards Features IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX IEEE 802.3x Flow Control Number of Port: 1 10/100/1000BaseT with RJ-45 Connector 1 Gigabit Fiber port with SC, ST, LC or SFP Open Slot Data Transfer Rate 2000Mbps/Full-Duplex Transmission Media TP: 1000BaseT Cat. 5, 5E, 6 UTP/STP, up to 100 m 1000BaseSX: (220/550M) 50/125μm Multi Mode Fiber optic cable, up to 220 m 62.
Led Indicators Power Requirement Power Consumption Dimensions Weight Operating Temperature Storage Temperature Humidity Certifications (TX):10/100M/ACT,1000M/ACT (FX): Link/ACT Per Unit: Power DC 5V 5 Watts (Max) 102 × 75 × 23 mm (L x W x H) 210 g 0 to 45℃ -20 to 90℃ 10 to 90% RH (non-condensing) FCC, CE 9
