User guide

12
Select “Basic Settings” from the menu on the left side of
the screen.
“Basic Settings” allows you to set the mode of the access
point and configure the settings accordingly.
Open the drop down menu labeled “Mode” and select
from the 6 available modes:
The available modes are:
AP
Access point mode allows wireless clients to
connect to this device and exchange data
with devices connected to the wired
network.
Station-Infrastructure
Also known as wireless client mode. Enables
Ethernet-only devices such as smart TVs and
game consoles to connect to a wireless
network
AP Bridge-Point to
Point
Establishes a wireless connection with
another wireless access point using the
same mode, and links any wired networks
connected to these two wireless access
points together. Only one access point can
be connected in this mode.
AP Bridge-Point to
Multi-Point
Establishes a wireless connection with other
wireless access points using the same mode,
and links any wired networks connected to
these wireless access points together. Up to
4 access points can be connected in this
mode.
AP Bridge-WDS
This mode is similar to “AP Bridge to