User guide

20
II-4. AP Client Mode
1. Select AP Client Mode and click “Next”.
2. You have the option to change the password used to access the device’s
browser based configuration interface. For first time setup, please simply
click “Next” without changing anything.
3. The device will search for nearby wireless networks to connect to. If you
cannot find the access point you wish to connect to, click “Scan” to refresh
the list of wireless networks. Select the wireless network you wish to
connect to and click “Next” to continue.
4. If the wireless network you selected requires a network security key, enter
it here. If you do not know the network security key then please refer to
IV-2. Appendix How to Find Your Network Security Key. Click “Next” to
continue when finished.