User guide

II-5. Repeater Mode (Wi-Fi Extender)

1. Select Repeater Mode and click “Next”.

2. You will be prompted to set the SSID of this device. The SSID will be the

name of the device when you connect to it wirelessly. The default SSID is

Edimax AP, you are option to change it to the same SSID as your current

wireless network. This page also offers the option to change the password

used to access the device’s browser based configuration interface.

3. The device will search for nearby wireless networks to connect to. If you

cannot find the access point you wish to connect to, click “Scan” to refresh

the list of wireless networks. Select the wireless network you wish to

connect to, and click “Next” to continue.

Note: Note the channel number used by the

wireless router or access point you select. If the

router or AP uses “Auto” for its channel selection,

then this repeater will disconnect from the router

or AP as soon as it switches channels. For best

results, check the wireless settings for your router