User guide

26
II-6. Hardware Installation
After configuring your device, you can install it in its final location.
Access Point Mode
Connect one port of the device to your router or xDSL modem. You can now
connect a computer or other network device to the access point wirelessly by
locating and connecting to its SSID. Or you can connect a computer/device to
the access point using an Ethernet cable.
AP Client Mode
Connect one port of the access point to the network device you wish to
connect to the Internet wirelessly, e.g. a games console or smart TV. Your
network device should now be connected to your existing wireless network.
Repeater Mode
Position the device in a location for optimal wireless extension; usually a
central location in your house or roughly an equal distance between your
router and the furthest wireless client. You can connect to the access point
wirelessly by locating and connecting to its SSID.