User guide

39
Band
Please select the wireless band you wish to
use. By selecting different band settings,
you’ll be able to allow or deny access points
using certain bands.
If you select 2.4GHz (B), 2.4GHz (N), or
2.4GHz (G), only access points using the
wireless band you select (802.11b, 802.11n,
or 802.11g) will be able to connect to this
device.
If you select 2.4GHz (B+G), then only access
points using the 802.11b and 802.11g bands
will be able to connect to this device.
If you want to allow 802.11b, 802.11g, and
802.11n access points to connect to this
device, select 2.4GHz (B+G+N).
Channel
Number
Please select the channel number you wish
to use. The channel number must be same
as the other wireless access point you wish
to connect to.
MAC address 1
Please input the MAC address of the
wireless access point you wish to connect
to.
Set Security
Click this button to select an encryption
mode for this wireless link. A popup window
with security options will appear.
Click “APPLY” to save changes. The following message will appear: