User guide

43
MAIN ESSID
Please input the ESSID (the name used to
identify this wireless access point) here. You
can input up to 32 alphanumerical
characters. Please note that the ESSID is
case sensitive.
Channel
Number
Please select a channel number you wish to
use. The channel number must be same as
the other wireless access points you wish to
connect to.
Associated
Clients
Click the “Show Active Clients” button and a
new window will appear, which contains
information about all wireless clients
connected to this access point. You can click
the “Refresh” button in the popup window
to keep the information up-to-date.
MAC address
1-4
Please input the MAC addresses of the
wireless access point you wish to connect
to.
Set Security
Click this button to select an encryption
mode for this wireless link. A popup window
with security options will appear.
Click “APPLY” to save changes. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
III-2-6. Universal Repeater Mode
In this mode, this device acts as a wireless extender, performing both the
functions of a client and an access point. It can extend the Wi-Fi coverage of
an access point and eliminate dead spots.