User guide

45
Channel
Number
Please select a channel number you wish to
use. The channel number must be same as
the other wireless access points you wish to
connect to.
Associated
Clients
Click the “Show Active Clients” button and a
new window will appear, which contains
information about all wireless clients
connected to this access point. You can click
the “Refresh” button in the popup window
to keep the information up-to-date.
Root AP SSID
In Universal Repeater mode, this device will
act as a station and connect to a root AP.
Enter the SSID of the root AP here, or click
the “Select Site Survey” button to choose a
root AP.
Select Site
Survey
Click the “Select Site Survey” button, and a
“Wireless Site Survey Table” will pop up. It
will list all available access points nearby.
Select one access point in the table for this
device to connect to (please see below).
Wireless Site Survey
When you click the “Select Site Survey” button, a “Wireless Site Survey Table”
will pop up. It will list all available access points nearby.
Note: If the SSID of the access point you wish to
connect to is not listed, try clicking the “Refresh”
button.
Note: The access point you wish to connect to may
have hidden its SSID, in which case it will not be
listed. You will need to manually enter the SSID in