User guide

the “MAIN SSID” field of the previous page.

III-3. WPS Setting

Wi-Fi Protected Setup (WPS) is a simple and convenient

way to build a connection between the travel router and

wireless network clients. This function eliminates the

need to select an encryption mode and enter an

encryption passphrase each time you want to set up a

connection. You can build a connection simply by

pressing a button on both the travel router and the

wireless client.

This router supports two types of WPS: Push-Button

Configuration (PBC) and PIN code.

To use PBC you will need to activate WPS by pushing the

Reset/WPS button, or by clicking “Start PBC” in the

“WPS” screen; and to activate WPS in the wireless client

by pushing a WPS button.

To use PIN code, you will need to enter the PIN code of the wireless client you

wish to connect to, and then activate WPS in the wireless client.