User guide

Code

client you wish to connect, and click the

“Start PIN” button. The “WLAN” LED on the

access point will stay on while this access

point waits for incoming WPS requests.

Note: When using PBC-type WPS setup,

you must press the hardware or software

WPS button on the wireless client within

120 seconds. If you do not do so in time,

you will need to activate WPS on the access

point again.

III-4. Advanced Setting

In “Advanced Setting” you can configure the advanced

features of the access point. Please do not modify these

settings unless you know what effect the changes will

have on your access point; advanced settings are for

experienced users only.

Note: Changing these settings can adversely

affect the performance of your access point.